A solid foundation for mixing

Powerful and musical, Temblor T10 active, front-firing subwoofers are designed to deliver fast and accurate transient response, extending low frequencies without a hint of “tubbiness” or overshoot. This ensures that Temblor-series subwoofers complement full-range monitors without overshadowing them, naturally extending the reach of your full-range system’s low end so that you can produce your best mix from top to bottom.

Tight, clean, responsive bass

The Temblor T10’s glass-composite low-frequency driver delivers tight and responsive bass, thanks to its lightweight and rigid cone. This design also provides lower distortion than other materials, ensuring that the sub-bass reproduction in your monitoring system is as coherent and clear as your full-range monitors.

A perfect fit with your full-range monitors

Temblor-series subwoofers make integrating a subwoofer into your monitoring setup easy so you can create the flattest possible response. The Temblor T10 provides a continuously variable lowpass filter (50 Hz to 130 Hz), allowing you to create a seamless crossover transition between your full-range studio monitors and subwoofer for the most accurate listening environment possible.

The central hub of your monitoring setup

Temblor T10 subwoofers provide the connections and controls necessary to act as the central hub for a basic monitoring setup. A switchable highpass filter on the full-range outputs helps to avoid frequency cancellation and reinforcement in the subwoofer’s upper range. A polarity invert ensures your system is in phase.

Accuracy defined

When you hear the low-frequency foundation of your mix accurately, you can make more informed decisions and create more translatable mixes. Temblor T10 subwoofers are the natural sub-bass extension for virtually any full-range monitoring system. Hear the Temblor T10 at your favorite PreSonus dealer.

Main components

  • 10-inch, front-firing, glass-composite low-frequency transducer
  • Front-firing, bass-reflex acoustic port

Controls and filters

  • Input gain control (-30 dB to +6 dB, continuously variable)
  • Continuously variable lowpass filter (50 Hz to 130 Hz)
  • Built-in crossover
  • Switchable highpass filter removes frequency content below 80 Hz from the full-range signal sent from the Temblor outputs to the main monitors
  • Momentary footswitch (included) bypasses the subwoofer, highpass filter, and Sub Out
  • Polarity invert
  • Ground-lift switch

Power and safety

  • 250 watt, Class AB amplification
  • Internal damping and heat sink
  • Integrated rubber feet for stable placement

Inputs and outputs

  • Left and right, balanced XLR and ¼” TRS and unbalanced RCA main inputs
  • Left and right balanced XLR and ¼” TRS outputs
  • XLR subwoofer output for connecting a second Temblor T10

Inputs

  • 2- Balanced XLR
  • 2- Balanced ¼” TRS
  • 2- Unbalanced RCA

Outputs

  • 2- Balanced XLR (full range with 80 Hz HPF option)
  • 2- Balanced ¼” TRS (full range with 80 Hz HPF option)
  • Balanced XLR (Sub Out)

Performance

  • Frequency Response: 20 Hz – 200 Hz
  • Low Pass Filter Frequency: 50 – 130 Hz (variable)
  • Signal-to-Noise Ratio: >98 dB (A weighted)
  • THD: 0.019% @ power <160W
  • Amplifier Power: 250W peak, 170W RMS
  • Power Consumption: 230W
  • Amplifier Type: Class AB
  • Peak SPL at 1m: 113 dB
  • Woofer: 10” glass-composite, front-firing
  • Acoustic Port: Front-firing bass reflex

User Controls

  • Input Gain Range: -30 to +6 dB
  • Polarity Switch: 0° or 180°
  • Low Pass Filter Control: 50 Hz to 130 Hz
  • Ground Lift Switch: On/Off
  • High Pass Filter Switch: On/Off
  • Bypass Footswitch: On/Off

Protection

  • RF interference
  • Output-current limiting
  • Over-temperature
  • Turn-on/off transient
  • Subsonic filter
  • External mains fuse

Power

  • 100-120V ~50/60 Hz or 220-240V ~50/60 Hz

Cabinet

  • Vinyl-laminated MDF

Physical

  • Width: 12.6” (320 mm)
  • Depth: 15.75” (400 mm)
  • Height: 15.75” (400 mm)
  • Weight: 39.46 lbs (17.9 kg)
  • MPN: 125074
  • UPC: 673454002687

Audio MIDI Plus is committed to deliver the best experience for our customers. If for some reason you are not satisfied with your purchase, you may return it for a refund of the purchase price, an exchange or a store credit within 30 days from the ship date. 

In the unlikely event that you received a defective product, a wrong product, or damaged product, Audio MIDI Plus will replace it at no charge of any additional shipping cost. We will send you a prepaid label to return the item, and ship you a replacement. You will not incur any shipping charges. Please notify us of any of damaged, defective or misshipped products within 14 days.

After 30 days, you may request manufacturer warranty if your item malfunctions. Unless otherwise specified, Audio MIDI Plus is an authorized dealer for all the brands we represent.

How to request a return:
Please email us or call us to obtain a RMA number. All returns must be in a re-sellable condition and include all packing materials, accessories and paperwork. We may apply a restocking fee if the returned products fall into these following categories:

  • Missing original packaging, manuals, accessories, or any contents that was included
  • RMA number was not associated with the return
  • Items not in original like new condition

Please send all returns to:
Audio MIDI Plus Returns
3725 Saddle Drive,
Carlsbad, CA 92010

The following items are not returnable, unless received DOA, in which we will send a replacement:

  • Software
  • Electronic Delivery of Software
  • Special orders
  • DVD’s

Items that fall into the in mouth and in ear use category, such as mouthpieces, earphones, ear plugs, harmonicas, cannot be returned due to health regulations

Thank You for shopping with us!

If your item is eligible for shipment outside of the United States, Tax, Duty, and/or VAT and brokerage fees are the buyer's sole responsibility. Please check with your local authorities to assess these extra fees.

Import duties, taxes, and charges are not included in the item price or shipping cost. These charges are the buyer's responsibility. Please check with your country's customs office to determine what these additional costs will be prior to bidding or buying.

International Friends: If you refuse a delivery due to Tax and/or Duty, we reserve the right to refund you only when the package is successfully returned back to us, and MINUS all shipping charges

Most software items are now Electronic Delivery Only. Once payment is received, we will Email you the necessary codes and/or download links. Please be sure to check your junk mail and spam folders for this Email.

While most items are in stock either in our retail store or fulfillment warehouse in Carlsbad, CA, in some cases items may need to be ordered and/or drop shipped from the manufacturer. Please allow 3-10 days for order processing, fulfillment, and setup, as well as transit and delivery time. Tracking will be available within 48 hours in most cases.

Please call us at (844) 577-4502 10AM-6PM PT M-S for an IN-HAND description of the item that you are interested in. We are always happy to help, and look forward to speaking with you if needed. Live Skype may also be available for you.

Related Products

< >