Four boutique tube amps in one

If your tone is your masterpiece, the DT25 tube guitar combo amp is your paintbrush. This portable 25W/10W tube amp from Line 6 and tube-amp guru Reinhold Bogner gives you four stunning, lust-worthy amp voicings and unprecedented versatility that lay the foundation for you to build your perfect tone.

The powerful combination of reconfigurable analog components and HD modeling allows the DT25 combo to be four boutique tube amps in one, capable of producing stunning American cleans, British crunch, class A chime, and modern high-gain tones. Selectable operating class, power tube mode, and four Voicings (which offer the perfect combinations of negative feedback loop topology, and HD preamp and tone stack modeling) can dial in classic vintage tones or be shaped into highly customized originals - and each one drips with boutique tone and touch-response.

The DT25 amp gets to the point. It's a simple, two-channel amp with a streamlined front panel. But if you connect a POD HD multi-effect pedal or POD HD Pro multi-effect rack to this little monster the two integrate to become a boutique tube amp factory!

Connected via exclusive L6 LINK technology, the DT25 amp and POD multi-effect rewrite the traditional amp/multi-effect paradigm and introduce powerful new concepts in control and customization. Add effects, additional amp voicings, foot control and instant scalability (including stereo operation with multiple DT25 amplifiers). DT25 is the perfect pairing for POD HD multi-effects. The days of plugging a POD into the front of an amp are over!

Revolutionary Bogner tube design meets Line 6 HD modeling

The Voicing switch is the heart of DT25 amp. It conjures the characteristic tone, feel and response that are at the heart of four celebrated amp voicings: American clean, British crunch, class A chime and modern high-gain. Different negative feedback loop topologies pair with HD preamp and tone stack modeling to produce the perfect tonal springboards for you to craft your perfect tones:

  • Voicing I: Classic American Clean (tight negative feedback loop)
  • Voicing II: British Crunch (medium negative feedback loop)
  • Voicing III: Class A Chime (zero negative feedback loop)
  • Voicing IV: Modern, High-Gain (resonant negative feedback loop)

Selectable operating class and power tube mode

Take your tone in many different directions with the selectable operating classes and power tube modes. Mix and match them with the Voicing switch to dial in truly unique tones. Or align the components in tried-and-true combinations to deliver fresh takes on the immortal classics.

  • Selectable operating classes - Class AB/25 watts/fixed bias; Class A/10 watts/cathode biased
  • Selectable power tube modes - Pentode; Triode

Any two amps you want, separated by a single channel switch

The two channels can be set to any combination of Voicing, operating class and power tube mode, so the channel switch is more like an A/B switch connected to two different amps. (Or, for a boost channel, set the channels the same with one a little louder.)

For example, set Channel A to a California clean tone. It can be complete with a high amount of negative feedback for a tight sound, characteristic class AB headroom and plenty of pentode-powered body. Set Channel B to deliver vintage Class A chime with zero negative feedback for an open, dynamic feel. Triode mode darkens the tone a bit and rounds off the edges, and Class A operation provides no shortage of touch sensitivity when you dig in with your pick. That's total analog and digital reconfiguration in one touch.

DT25 amplifier + POD HD multi-effect = Boutique tube amp factory

DT25 amplifiers and POD HD multi-effects don't just connect, they seamlessly integrate to transform into a boutique tube amp factory capable of creating any tone you need with incredible tone and feel. POD HD multi-effects come to the party with additional models including 20+ HD amp models, 20+ HD guitar preamp-only models, huge collections of effects, cabs, mics and more. With a single L6 LINK connection, you get:

  • Automatic analog configuration. Select a POD HD amp model or preset and the DT25 analog components will automatically configure themselves to the appropriate operating class, biasing method, negative feedback topology and power tube mode.
  • Save custom analog configurations. Saving your custom DT25 configurations is as easy as saving POD HD presets. Tweak the DT25 amp settings, press Save on the POD HD multi-effect and incredibly unique and complex amp configurations can be recalled instantly.
  • No ground loops. You'll never get ground loop hum from an L6 LINK connection
  • Flexible tube section designed by tube-amp guru Reinhold Bogner
  • 1 - 12AX7, 2 EL84 tubes
  • 1x12" Custom Celestion G12H90 speaker
  • Intuitive, 2-channel design, instantly reconfigurable per channel
  • Selectable operating class (Class AB/25 Watts/Fixed Bias or Class A/10 Watts/Cathode Biased)
  • Selectable power tube mode (Pentode or Triode)
  • Four unique Voicings (negative feedback loop topologies paired with HD preamp and tone stack modeling) : (1) Classic American Clean/Tight NFL (2) British Crunch/Medium NFL (3) Class A Chime/Zero NFL, (4) Modern, High-Gain/Resonant NFL
  • HD amp modeling technology fuels each Voicing's preamp and tone stack, and automatically pairs them with corresponding Bogner-designed dynamic analog circuitry
  • Both channels have Drive, Bass, Mid, Treble, Presence, Reverb, Channel Volume. Rest of front panel: Channel switch ; Voicing switch ; Pentode/Triode switch ; Class A/Class AB switch ; Master volume ; Power; Standby ; Backlit front panel
  • Modeled spring reverb with individual level control per channel
  • Back-lit front panel
  • MIDI I/O
  • Series effects loop
  • Cabinet simulated direct output
  • Low Volume Mode provides cranked up tube tone at whisper-quiet volume
  • Speaker jack-sensing provides relay driven output transformer protection circuit
  • L6 LINK connects the DT25 amp to a POD HD multi-effect for additional effects, amp voicings and instant scalability (including stereo operation with multiple DT25 amplifiers) - all controlled by any L6 LINK equipped POD HD multi-effect
  • MPN : 99-011-0905
  • UPC : 614252024617

    Audio MIDI Plus is committed to deliver the best experience for our customers. If for some reason you are not satisfied with your purchase, you may return it for a refund of the purchase price, an exchange or a store credit within 30 days from the ship date. 

    In the unlikely event that you received a defective product, a wrong product, or damaged product, Audio MIDI Plus will replace it at no charge of any additional shipping cost. We will send you a prepaid label to return the item, and ship you a replacement. You will not incur any shipping charges. Please notify us of any of damaged, defective or misshipped products within 14 days.

    After 30 days, you may request manufacturer warranty if your item malfunctions. Unless otherwise specified, Audio MIDI Plus is an authorized dealer for all the brands we represent.

    How to request a return:
    Please email us or call us to obtain a RMA number. All returns must be in a re-sellable condition and include all packing materials, accessories and paperwork. We may apply a restocking fee if the returned products fall into these following categories:

    • Missing original packaging, manuals, accessories, or any contents that was included
    • RMA number was not associated with the return
    • Items not in original like new condition

    Please send all returns to:
    Audio MIDI Plus Returns
    3725 Saddle Drive,
    Carlsbad, CA 92010

    The following items are not returnable, unless received DOA, in which we will send a replacement:

    • Software
    • Electronic Delivery of Software
    • Special orders
    • DVD’s

    Items that fall into the in mouth and in ear use category, such as mouthpieces, earphones, ear plugs, harmonicas, cannot be returned due to health regulations

    Thank You for shopping with us!

    If your item is eligible for shipment outside of the United States, Tax, Duty, and/or VAT and brokerage fees are the buyer's sole responsibility. Please check with your local authorities to assess these extra fees.

    Import duties, taxes, and charges are not included in the item price or shipping cost. These charges are the buyer's responsibility. Please check with your country's customs office to determine what these additional costs will be prior to bidding or buying.

    International Friends: If you refuse a delivery due to Tax and/or Duty, we reserve the right to refund you only when the package is successfully returned back to us, and MINUS all shipping charges

    Most software items are now Electronic Delivery Only. Once payment is received, we will Email you the necessary codes and/or download links. Please be sure to check your junk mail and spam folders for this Email.

    While most items are in stock either in our retail store or fulfillment warehouse in Carlsbad, CA, in some cases items may need to be ordered and/or drop shipped from the manufacturer. Please allow 3-10 days for order processing, fulfillment, and setup, as well as transit and delivery time. Tracking will be available within 48 hours in most cases.

    Please call us at (844) 577-4502 10AM-6PM PT M-S for an IN-HAND description of the item that you are interested in. We are always happy to help, and look forward to speaking with you if needed. Live Skype may also be available for you.

    Related Products

    < >