Sold out.

The EP2000 and EP4000 represent everything musicians love about Behringer's popular EP1500/EP2500--excellent sound quality, road-worthy toughness and reliability, low-noise operation and incredible power. With 2,000 and 4,000-Watts respectively, the EP2000 and EP4000 amplifiers are perfect for medium-sized club gigs, mobile PA systems, church services or public spaces.

  • Excellent sound quality, road-worthy toughness and reliability, low-noise operation and incredible power. Click to enlarge.
  • Professional speaker connectors and "touch-proof" binding posts support most speaker wiring systems
  • XLR and 1/4" TRS input connectors for compatibility with any source.

Everything You Need, Nothing You Don't

The über-simple front panel controls of these amps give you all of your sound's vital signs at a glance. After flipping the MAIN switch, the POWER LED will light when the amp is ready for action. Both channels have independent gain dials as well as clip LEDs that indicate when the signal is distorted and you need to reduce the gain. There are also SIGNAL LEDs that light up when a signal is present at the input.

Panel Discussion

A panel of switches found on the back panel offers an array of cool options to apply to both channels of the EP2000 and EP4000. The Clip Limiter lets you get even more out of the amplifier without overdriving either it or your speaker system. Built-in circuitry automatically senses when the EP2000 or EP4000 is being overdriven into "clipping" and then momentarily reduces the input level to avoid clipping distortion. This all happens in a few thousandths of a second, so it's an inaudible way of avoiding audible clipping distortion. Of course, you can turn the Limiter off if you're feeling lucky.

Ultra-low frequency sounds (infrasonics) are caused by rickety stage vibrations, mic thumps and wind noise. While technically inaudible, they can cause a huge drain on amp power, potential damage to your speakers and a sludgy sound in the audible bass ranges. Both EP models feature a defeatable Low Cut Filter that chops off unwanted frequencies below 50Hz or 30Hz (depending on your PA system's capabilities).

The same panel contains the switches that allow you to put these amps to work in either stereo or bridge (mono) mode. Both the EP2000 and EP4000 can be linked to additional power amps by switching into parallel mode.

These Amps Have Guts

There's plenty of awesome features on the outside of the EP2000 and EP4000, but there's also a team of cool components on the inside helping it work its magic. They come loaded with famously reliable Toshiba/Fairchild power transistors as well as a high-current toroidal transformer for ultra-high transient response and further reliability. Independent DC and thermal overload protection on each channel automatically protects the amplifier and speakers from any show-stopping meltdowns. There's no need for fuses, giving you one fewer potential mid-gig headache.

The EP2000 and EP4000 have both XLR and 1/4" TRS inputs. Even the outputs are totally flexible, consisting of Speakon-compatible outputs and five-way binding posts. Whether you're dealing with bare wire or boutique audiophile cabling, the EP2000 and EP4000 are right at home.

The exhaust fan, visible on the back panel, is the final stage of an internal front-to-back cooling system that keeps these amps working in the mild temperatures they love, even through periods of extended use. Finally, an impact-resistant, all-steel 2U rackmount chassis helps these workhorses stand up to all the rigors of the road.

The Legend Powers On

If you read the reviews of the EP2000 and EP4000's older brothers, the EP1500 and EP2500, and it's clear that those amps are renowned not only for their performance and durability, but also their astoundingly low price tags. The EP2000 and EP4000 extend that legacy to the next level. Why shell out for a "Brand-X" amp when you can get a BEHRINGER EUROPOWER amp and have money left over for other gear?

What's in the Box

Behringer Europower EP4000, Power Cable, User's Manual

BEHRINGER EUROPOWER EP4000

The EP2000 and EP4000 represent everything musicians love about our popular EP1500/EP2500 - excellent sound quality, road-worthy toughness and reliability, low-noise operation and incredible power. With 2,000 and 4,000-Watts respectively, the EP2000 and EP4000 amplifiers are perfect for medium-sized club gigs, mobile PA systems, church services or public spaces.

Everything You Need, Nothing You Don't

The über-simple front panel controls of these amps give you all of your sound's vital signs at a glance. After flipping the MAIN switch, the POWER LED will light when the amp is ready for action. Both channels have independent gain dials as well as clip LEDs that indicate when the signal is distorted and you need to reduce the gain. There are also SIGNAL LEDs that light up when a signal is present at the input..

Accelerated Transient Response Delivers the Knock-Out Punch

It takes huge pulses of energy (current and voltage) to propel a woofer cone out fast enough to match a bass beat. That's called Transient Response and it's the holy grail of amp designers. By carefully selecting transistors with extremely highslew rates and optimizing other proprietary parts of our circuitry, our amps are able to react instantly to even the most demanding electronic bass impulses. If the woofers in your PA system can keep up, your audience will hear a tighter, crisper, more natural sound.

  • 2 x 2,000 Watts into 2 Ohms; 2 x 1,400 Watts into 4 Ohms; 4,000 Watts into 4 Ohms (bridge mode)
  • ATR (Accelerated Transient Response) technology for ultimate punch and clarity
  • Switchable limiters offer maximum output level with reliable overload protection
  • Detented gain controls for precise setting and matching of sensitivity
  • Precise Power, Signal and Clip LEDs to monitor performance
  • XLR and 1/4" TRS input connectors for compatibility with any source
  • Professional speaker connectors and "touch-proof" binding posts support most speaker wiring systems
  • Selectable low-frequency filters remove damaging infra-sound frequencies
  • Independent DC and thermal overload protection on each channel automatically protects amplifier and speakers
  • High-current toroidal transformer for ultra-high transient response and absolute reliability
  • "Back-to-front" ventilation system including air filter for reliable operation
  • "Built-like-a-tank", impact-resistant, all-steel 2U rackmount chassis
  • High-quality components and exceptionally rugged construction ensure long life
  • Conceived and designed by BEHRINGER Germany
  • MPN : EP4000
  • UPC : 689076150514

Audio MIDI Plus is committed to deliver the best experience for our customers. If for some reason you are not satisfied with your purchase, you may return it for a refund of the purchase price, an exchange or a store credit within 30 days from the ship date. 

In the unlikely event that you received a defective product, a wrong product, or damaged product, Audio MIDI Plus will replace it at no charge of any additional shipping cost. We will send you a prepaid label to return the item, and ship you a replacement. You will not incur any shipping charges. Please notify us of any of damaged, defective or misshipped products within 14 days.

After 30 days, you may request manufacturer warranty if your item malfunctions. Unless otherwise specified, Audio MIDI Plus is an authorized dealer for all the brands we represent.

How to request a return:
Please email us or call us to obtain a RMA number. All returns must be in a re-sellable condition and include all packing materials, accessories and paperwork. We may apply a restocking fee if the returned products fall into these following categories:

  • Missing original packaging, manuals, accessories, or any contents that was included
  • RMA number was not associated with the return
  • Items not in original like new condition

Please send all returns to:
Audio MIDI Plus Returns
3725 Saddle Drive,
Carlsbad, CA 92010

The following items are not returnable, unless received DOA, in which we will send a replacement:

  • Software
  • Electronic Delivery of Software
  • Special orders
  • DVD’s

Items that fall into the in mouth and in ear use category, such as mouthpieces, earphones, ear plugs, harmonicas, cannot be returned due to health regulations

Thank You for shopping with us!

If your item is eligible for shipment outside of the United States, Tax, Duty, and/or VAT and brokerage fees are the buyer's sole responsibility. Please check with your local authorities to assess these extra fees.

Import duties, taxes, and charges are not included in the item price or shipping cost. These charges are the buyer's responsibility. Please check with your country's customs office to determine what these additional costs will be prior to bidding or buying.

International Friends: If you refuse a delivery due to Tax and/or Duty, we reserve the right to refund you only when the package is successfully returned back to us, and MINUS all shipping charges

Most software items are now Electronic Delivery Only. Once payment is received, we will Email you the necessary codes and/or download links. Please be sure to check your junk mail and spam folders for this Email.

While most items are in stock either in our retail store or fulfillment warehouse in Carlsbad, CA, in some cases items may need to be ordered and/or drop shipped from the manufacturer. Please allow 3-10 days for order processing, fulfillment, and setup, as well as transit and delivery time. Tracking will be available within 48 hours in most cases.

Please call us at (844) 577-4502 10AM-6PM PT M-S for an IN-HAND description of the item that you are interested in. We are always happy to help, and look forward to speaking with you if needed. Live Skype may also be available for you.

Related Products

< >