{"id":1528192835,"title":"JBL LSR4326P Bi-Amp 6\" Studio Monitor Active \/ Powered Studio Monitor","handle":"jbl-lsr4326p-bi-amp-6in-studio-monitor-active-powered-studio-monitor-jlsr4326p","description":"\u003cdiv class='\"content\"'\u003e\n\u003cdiv class='\"productDescriptionWrapper\"'\u003e\n\u003cdiv class='\"emptyClear\"'\u003e\n\u003cp\u003e\u003cstrong\u003eAutomatically analyzes and corrects the sound for accurate mixing.\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThe JBL LSR4326P Studio Monitors are designed for critical stereo and multichannel audio production applications that require exceptional spectral accuracy and high SPL capability. Exclusive technology from JBL automatically analyzes and corrects the response of each speaker in the room for absolute accuracy in mixing.\u003c\/p\u003e\n\u003cp\u003eAcknowledging that much of today's production is carried out in acoustically untreated rooms, the LSR4300 Series are the first professional monitor speakers to combine JBL's Linear Spatial Reference technology and automated RMCTM Room Mode Correction, an onboard system that automatically compensates for low frequency anomalies measured at the mix position.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eNetwork and Digital Features \u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThe JBL LSR4300 series speakers enhance computer-based audio production by incorporating systemwide volume control, input source selection, individual speaker solo and user EQ. They use the Harman HiQnetTM network protocol that allows centralized control of a multichannel system from any speaker's front panel, wireless remote control, or computer via a standard USB connection and LSR4300 Control Center Software. The network is configured using supplied CAT5 cable and by setting a DIP switch on each speaker. Harman HiQnet also enables synchronized RMC calibration of all speakers on the network.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003e438H Low Frequency Transducer \u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThe 6.25\" woofer in these JBL speakers uses a powerful, shielded neodymium magnet which can be used in close proximity to CRT-type monitors with no interference. The transducer uses a copper-clad polepiece that improves high frequency output by reducing voice coil inductance. A copper ribbon voice coil ensures high sensitivity, and a flux shorting ring stabilizes the magnetic field in the gap, reducing distortion. Heat sinking has been placed close to the magnetic gap in order to draw out heat as efficiently as possible. The cone is polymer coated for uniformity of response over the woofer's passband.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003e431G High Frequency Transducer\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThe JBL studio monitor's high frequency transducer has a treated silk diaphragm that produces uniform and smooth sound. Its flat ribbon aluminum voice coil ensures low-moving mass and enables the transducer to achieve response out to 22kHz. A lightweight neodymium magnet structure with integral heat sinking, along with ferrofluid in the magnetic gap, enable the transducer to produce high peak output levels with minimal power compression. The magnet structure is integrally shielded, enabling the system to be used in proximity to CRT-type monitors with no interference.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eBi-amplified Power System \u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThe JBL LSR4326P monitors incorporate 2 high power amplifiers that provide 150 watts of power to the low frequency transducer and 70 watts of power to the high frequency transducer. A precision digital dividing network having high-order Linkwitz-Riley slope characteristics for smooth transition between transducers, results in exceptional imaging and lack of time smear. The circuitry also yields a tonal-artifact-free noise floor.\u003c\/p\u003e\n\u003ch5\u003eFEATURES\u003c\/h5\u003e\n\u003cul\u003e\n\u003cli\u003e\u003cspan style=\"line-height: 1.4;\"\u003eTwo flush mounted handles\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan style=\"line-height: 1.4;\"\u003e3\/4″ MDF enclosure with structural ABS front baffle\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan style=\"line-height: 1.4;\"\u003eAutomated RMC™ Room Mode Correction optimizes response\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan style=\"line-height: 1.4;\"\u003eIntegrated processing provides Automated Room Mode Correction, and compensation for speaker-to-speaker placement variations\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan style=\"line-height: 1.4;\"\u003eFront panel includes output level meter and user controls\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan style=\"line-height: 1.4;\"\u003eHarman HiQnet network and USB computer interface provide centralized control of entire system from any speaker\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan style=\"line-height: 1.4;\"\u003eIntegrated bi-amplification with factory calibrated sensitivities\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan style=\"line-height: 1.4;\"\u003eAdvanced Linear Spatial Reference design ensures flatter-off-axis response\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan style=\"line-height: 1.4;\"\u003eMPN : LSR4326P\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan style=\"line-height: 1.4;\"\u003eUPC : 50036903035\u003c\/span\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cdiv id=\"detailsContainer\"\u003e\n\u003cdiv class=\"details\"\u003e\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e","published_at":"2015-07-09T06:00:00-07:00","created_at":"2015-07-09T06:00:39-07:00","vendor":"JBL","type":"Studio Monitors","tags":["50036903035","6in","active","cf-type-studio-monitors","cf-vendor-jbl","jbl lsr4326p bi-amp","monitor","powered","reverbsync:off","speakers\/monitors","studio","yamaha"],"price":54900,"price_min":54900,"price_max":54900,"available":true,"price_varies":false,"compare_at_price":69999,"compare_at_price_min":69999,"compare_at_price_max":69999,"compare_at_price_varies":false,"variants":[{"id":4571689155,"title":"Default Title","option1":"Default Title","option2":null,"option3":null,"sku":"JLSR4326P","requires_shipping":true,"taxable":true,"featured_image":null,"available":true,"name":"JBL LSR4326P Bi-Amp 6\" Studio Monitor Active \/ Powered Studio Monitor","public_title":null,"options":["Default Title"],"price":54900,"weight":14424,"compare_at_price":69999,"inventory_quantity":11,"inventory_management":null,"inventory_policy":"deny","barcode":"50036903035","requires_selling_plan":false,"selling_plan_allocations":[]}],"images":["\/\/cdn.shopify.com\/s\/files\/1\/0879\/4068\/products\/main-750x750_de6c9079-e282-4043-885d-d17c7a377451.jpeg?v=1436446839"],"featured_image":"\/\/cdn.shopify.com\/s\/files\/1\/0879\/4068\/products\/main-750x750_de6c9079-e282-4043-885d-d17c7a377451.jpeg?v=1436446839","options":["Title"],"media":[{"alt":"JBL LSR4326P Bi-Amp 6In Studio Monitor Active \/ Powered Studio Monitor","id":20886618211,"position":1,"preview_image":{"aspect_ratio":1.0,"height":750,"width":750,"src":"https:\/\/cdn.shopify.com\/s\/files\/1\/0879\/4068\/products\/main-750x750_de6c9079-e282-4043-885d-d17c7a377451.jpeg?v=1568697148"},"aspect_ratio":1.0,"height":750,"media_type":"image","src":"https:\/\/cdn.shopify.com\/s\/files\/1\/0879\/4068\/products\/main-750x750_de6c9079-e282-4043-885d-d17c7a377451.jpeg?v=1568697148","width":750}],"requires_selling_plan":false,"selling_plan_groups":[],"content":"\u003cdiv class='\"content\"'\u003e\n\u003cdiv class='\"productDescriptionWrapper\"'\u003e\n\u003cdiv class='\"emptyClear\"'\u003e\n\u003cp\u003e\u003cstrong\u003eAutomatically analyzes and corrects the sound for accurate mixing.\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThe JBL LSR4326P Studio Monitors are designed for critical stereo and multichannel audio production applications that require exceptional spectral accuracy and high SPL capability. Exclusive technology from JBL automatically analyzes and corrects the response of each speaker in the room for absolute accuracy in mixing.\u003c\/p\u003e\n\u003cp\u003eAcknowledging that much of today's production is carried out in acoustically untreated rooms, the LSR4300 Series are the first professional monitor speakers to combine JBL's Linear Spatial Reference technology and automated RMCTM Room Mode Correction, an onboard system that automatically compensates for low frequency anomalies measured at the mix position.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eNetwork and Digital Features \u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThe JBL LSR4300 series speakers enhance computer-based audio production by incorporating systemwide volume control, input source selection, individual speaker solo and user EQ. They use the Harman HiQnetTM network protocol that allows centralized control of a multichannel system from any speaker's front panel, wireless remote control, or computer via a standard USB connection and LSR4300 Control Center Software. The network is configured using supplied CAT5 cable and by setting a DIP switch on each speaker. Harman HiQnet also enables synchronized RMC calibration of all speakers on the network.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003e438H Low Frequency Transducer \u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThe 6.25\" woofer in these JBL speakers uses a powerful, shielded neodymium magnet which can be used in close proximity to CRT-type monitors with no interference. The transducer uses a copper-clad polepiece that improves high frequency output by reducing voice coil inductance. A copper ribbon voice coil ensures high sensitivity, and a flux shorting ring stabilizes the magnetic field in the gap, reducing distortion. Heat sinking has been placed close to the magnetic gap in order to draw out heat as efficiently as possible. The cone is polymer coated for uniformity of response over the woofer's passband.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003e431G High Frequency Transducer\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThe JBL studio monitor's high frequency transducer has a treated silk diaphragm that produces uniform and smooth sound. Its flat ribbon aluminum voice coil ensures low-moving mass and enables the transducer to achieve response out to 22kHz. A lightweight neodymium magnet structure with integral heat sinking, along with ferrofluid in the magnetic gap, enable the transducer to produce high peak output levels with minimal power compression. The magnet structure is integrally shielded, enabling the system to be used in proximity to CRT-type monitors with no interference.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eBi-amplified Power System \u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThe JBL LSR4326P monitors incorporate 2 high power amplifiers that provide 150 watts of power to the low frequency transducer and 70 watts of power to the high frequency transducer. A precision digital dividing network having high-order Linkwitz-Riley slope characteristics for smooth transition between transducers, results in exceptional imaging and lack of time smear. The circuitry also yields a tonal-artifact-free noise floor.\u003c\/p\u003e\n\u003ch5\u003eFEATURES\u003c\/h5\u003e\n\u003cul\u003e\n\u003cli\u003e\u003cspan style=\"line-height: 1.4;\"\u003eTwo flush mounted handles\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan style=\"line-height: 1.4;\"\u003e3\/4″ MDF enclosure with structural ABS front baffle\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan style=\"line-height: 1.4;\"\u003eAutomated RMC™ Room Mode Correction optimizes response\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan style=\"line-height: 1.4;\"\u003eIntegrated processing provides Automated Room Mode Correction, and compensation for speaker-to-speaker placement variations\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan style=\"line-height: 1.4;\"\u003eFront panel includes output level meter and user controls\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan style=\"line-height: 1.4;\"\u003eHarman HiQnet network and USB computer interface provide centralized control of entire system from any speaker\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan style=\"line-height: 1.4;\"\u003eIntegrated bi-amplification with factory calibrated sensitivities\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan style=\"line-height: 1.4;\"\u003eAdvanced Linear Spatial Reference design ensures flatter-off-axis response\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan style=\"line-height: 1.4;\"\u003eMPN : LSR4326P\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan style=\"line-height: 1.4;\"\u003eUPC : 50036903035\u003c\/span\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cdiv id=\"detailsContainer\"\u003e\n\u003cdiv class=\"details\"\u003e\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e"}

{"id":1528192323,"title":"JBL LSR4328P Bi-Amp 8\" Studio Monitor Active \/ Powered Studio Monitor Pair - LSR4328P","handle":"jbl-lsr4328p-bi-amp-8in-studio-monitor-active-powered-studio-monitor-jlsr4328p","description":"\u003cp\u003e\u003cstrong\u003eAutomatically analyzes and corrects the sound for accurate mixing.\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThe JBL LSR4300 Series Studio Monitors are designed for critical stereo and multi-channel audio production applications that require exceptional spectral accuracy and high SPL capability. Exclusive technology from JBL automatically analyzes and corrects the response of each speaker in the room for absolute accuracy in mixing.\u003c\/p\u003e\n\u003cp\u003eAcknowledging that much of today's production is carried out in acoustically untreated rooms, the LSR4300 Series is the first professional monitor to combine JBL's Linear Spatial Reference technology and automated RMCTM Room Mode Correction, an onboard system that automatically compensates for low frequency anomalies measured at the mix position.\u003c\/p\u003e\n\u003cp\u003eThe LSR4300 enhances computer-based production by incorporating system-wide volume control, input source selection, individual speaker solo and user EQ. Harman HiQnetTM Network protocol enables centralized system-wide control from any speaker, wireless remote control, or computer using LSR4300 Control Center Software.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003e438H Low Frequency Transducer \u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThe 8\" woofer utilizes a powerful, shielded lightweight neodymium magnet which can be used in close proximity to CRT-type monitors with no interference. The transducer utilizes a copper-clad polepiece that improves high frequency output by reducing voice coil inductance. A copper ribbon voice coil ensures high sensitivity, and a flux shorting ring stabilizes the magnetic field in the gap, reducing distortion. Heat sinking has been placed close to the magnetic gap in order to draw out heat as efficiently as possible. The cone is polymer coated for uniformity of response over the woofer's passband.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003e431G High Frequency Transducer \u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThe high frequency transducer has a treated silk diaphragm that produces uniform and smooth sound. Its flat ribbon aluminum voice coil ensures low-moving mass and enables the transducer to achieve response out to 22kHz. A lightweight neodymium magnet structure with integral heat sinking, along with ferrofluid in the magnetic gap, enable the transducer to produce high peak output levels with minimal power compression. The magnet structure is integrally shielded, enabling the system to be used in proximity to CRT-type monitors with no interference.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eBi-amplified Power System \u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThe LSR4328P incorporates 2 high power amplifiers that provide 150 watts of power to the low frequency transducer and 70 watts of power to the high frequency transducer. A precision digital dividing network having high-order Linkwitz-Riley slope characteristics for smooth transition between transducers, results in exceptional imaging and lack of time smear. The circuitry also yields a tonal-artifact-free noise floor.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eNetwork and Digital Features \u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThe LSR4300 Series utilizes the Harman HiQnetTM network protocol that allows centralized control of a multi-channel system from a from any speaker's front panel, wireless remote control, or computer via a standard USB connection and LSR4300 Control Center Software. The network is configured using supplied CAT5 cable and by setting a DIP switch on each speaker. Harman HiQnet also enables synchronized RMC calibration of all speakers on the network.\u003c\/p\u003e\n\u003ch5\u003eFEATURES\u003c\/h5\u003e\n\u003cul\u003e\n\u003cli\u003e\u003cspan style=\"line-height: 1.4;\"\u003eContains 2 monitors and software\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan style=\"line-height: 1.4;\"\u003eKey Features: Advanced LSR Linear Spatial\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan style=\"line-height: 1.4;\"\u003eReference Design provides neutral off-axis response for greater clarity at the mix position\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan style=\"line-height: 1.4;\"\u003eAutomated RMCTM Room Mode\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan style=\"line-height: 1.4;\"\u003eCorrection system with calibration microphone measures and automatically compensates for low frequency standing waves and boundary conditions\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan style=\"line-height: 1.4;\"\u003eHarman HiQnetTM Network Protocol enables system-wide control of level, EQ, input selection, solo and more\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan style=\"line-height: 1.4;\"\u003eWireless remote control and LSR4300\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan style=\"line-height: 1.4;\"\u003eControl Center Software enable control from the listening position\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan style=\"line-height: 1.4;\"\u003eAES\/EBU, S\/PDIF digital inputs\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan style=\"line-height: 1.4;\"\u003eBalanced analog input with selectable +4dBu \/ -10 dBV sensitivity\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan style=\"line-height: 1.4;\"\u003eBi-amplified design eliminates the need for external amplification\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan style=\"line-height: 1.4;\"\u003eFront panel output meter with variable brightness displays signal level\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan style=\"line-height: 1.4;\"\u003eCustom designed, self-shielded transducers with neodymium motor structures for exceptional transient response and superb power-handling\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan style=\"line-height: 1.4;\"\u003eIntegrated mounting points allow\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan style=\"line-height: 1.4;\"\u003ewall mounting for greater placement options\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan style=\"line-height: 1.4;\"\u003eBuilt-in handles facilitate optimum positioning\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan style=\"line-height: 1.4;\"\u003eLow and High Frequency\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan style=\"line-height: 1.4;\"\u003eEqualization with factory presets allows tailoring of response to preference, or acoustic conditions in the room\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan style=\"line-height: 1.4;\"\u003eMPN : LSR4328P\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan style=\"line-height: 1.4;\"\u003eUPC : 50036903066\u003c\/span\u003e\u003c\/li\u003e\n\u003c\/ul\u003e","published_at":"2015-07-09T06:00:00-07:00","created_at":"2015-07-09T06:00:37-07:00","vendor":"JBL","type":"Studio Monitors","tags":["50036903066","8in","active","cf-type-studio-monitors","cf-vendor-jbl","jbl lsr4328p bi-amp","monitor","powered","reverbsync:off","speakers\/monitors","studio"],"price":168000,"price_min":168000,"price_max":168000,"available":true,"price_varies":false,"compare_at_price":199999,"compare_at_price_min":199999,"compare_at_price_max":199999,"compare_at_price_varies":false,"variants":[{"id":4571678595,"title":"Default Title","option1":"Default Title","option2":null,"option3":null,"sku":"JLSR4328P","requires_shipping":true,"taxable":true,"featured_image":null,"available":true,"name":"JBL LSR4328P Bi-Amp 8\" Studio Monitor Active \/ Powered Studio Monitor Pair - LSR4328P","public_title":null,"options":["Default Title"],"price":168000,"weight":16465,"compare_at_price":199999,"inventory_quantity":11,"inventory_management":null,"inventory_policy":"deny","barcode":"50036903066","requires_selling_plan":false,"selling_plan_allocations":[]}],"images":["\/\/cdn.shopify.com\/s\/files\/1\/0879\/4068\/products\/main-750x750_cc5b7d59-b887-4f00-8793-15e8d205a779.jpeg?v=1436446837"],"featured_image":"\/\/cdn.shopify.com\/s\/files\/1\/0879\/4068\/products\/main-750x750_cc5b7d59-b887-4f00-8793-15e8d205a779.jpeg?v=1436446837","options":["Title"],"media":[{"alt":"JBL LSR4328P Bi-Amp 8In Studio Monitor Active \/ Powered Studio Monitor","id":20886552675,"position":1,"preview_image":{"aspect_ratio":1.0,"height":750,"width":750,"src":"https:\/\/cdn.shopify.com\/s\/files\/1\/0879\/4068\/products\/main-750x750_cc5b7d59-b887-4f00-8793-15e8d205a779.jpeg?v=1568697148"},"aspect_ratio":1.0,"height":750,"media_type":"image","src":"https:\/\/cdn.shopify.com\/s\/files\/1\/0879\/4068\/products\/main-750x750_cc5b7d59-b887-4f00-8793-15e8d205a779.jpeg?v=1568697148","width":750}],"requires_selling_plan":false,"selling_plan_groups":[],"content":"\u003cp\u003e\u003cstrong\u003eAutomatically analyzes and corrects the sound for accurate mixing.\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThe JBL LSR4300 Series Studio Monitors are designed for critical stereo and multi-channel audio production applications that require exceptional spectral accuracy and high SPL capability. Exclusive technology from JBL automatically analyzes and corrects the response of each speaker in the room for absolute accuracy in mixing.\u003c\/p\u003e\n\u003cp\u003eAcknowledging that much of today's production is carried out in acoustically untreated rooms, the LSR4300 Series is the first professional monitor to combine JBL's Linear Spatial Reference technology and automated RMCTM Room Mode Correction, an onboard system that automatically compensates for low frequency anomalies measured at the mix position.\u003c\/p\u003e\n\u003cp\u003eThe LSR4300 enhances computer-based production by incorporating system-wide volume control, input source selection, individual speaker solo and user EQ. Harman HiQnetTM Network protocol enables centralized system-wide control from any speaker, wireless remote control, or computer using LSR4300 Control Center Software.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003e438H Low Frequency Transducer \u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThe 8\" woofer utilizes a powerful, shielded lightweight neodymium magnet which can be used in close proximity to CRT-type monitors with no interference. The transducer utilizes a copper-clad polepiece that improves high frequency output by reducing voice coil inductance. A copper ribbon voice coil ensures high sensitivity, and a flux shorting ring stabilizes the magnetic field in the gap, reducing distortion. Heat sinking has been placed close to the magnetic gap in order to draw out heat as efficiently as possible. The cone is polymer coated for uniformity of response over the woofer's passband.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003e431G High Frequency Transducer \u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThe high frequency transducer has a treated silk diaphragm that produces uniform and smooth sound. Its flat ribbon aluminum voice coil ensures low-moving mass and enables the transducer to achieve response out to 22kHz. A lightweight neodymium magnet structure with integral heat sinking, along with ferrofluid in the magnetic gap, enable the transducer to produce high peak output levels with minimal power compression. The magnet structure is integrally shielded, enabling the system to be used in proximity to CRT-type monitors with no interference.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eBi-amplified Power System \u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThe LSR4328P incorporates 2 high power amplifiers that provide 150 watts of power to the low frequency transducer and 70 watts of power to the high frequency transducer. A precision digital dividing network having high-order Linkwitz-Riley slope characteristics for smooth transition between transducers, results in exceptional imaging and lack of time smear. The circuitry also yields a tonal-artifact-free noise floor.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eNetwork and Digital Features \u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThe LSR4300 Series utilizes the Harman HiQnetTM network protocol that allows centralized control of a multi-channel system from a from any speaker's front panel, wireless remote control, or computer via a standard USB connection and LSR4300 Control Center Software. The network is configured using supplied CAT5 cable and by setting a DIP switch on each speaker. Harman HiQnet also enables synchronized RMC calibration of all speakers on the network.\u003c\/p\u003e\n\u003ch5\u003eFEATURES\u003c\/h5\u003e\n\u003cul\u003e\n\u003cli\u003e\u003cspan style=\"line-height: 1.4;\"\u003eContains 2 monitors and software\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan style=\"line-height: 1.4;\"\u003eKey Features: Advanced LSR Linear Spatial\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan style=\"line-height: 1.4;\"\u003eReference Design provides neutral off-axis response for greater clarity at the mix position\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan style=\"line-height: 1.4;\"\u003eAutomated RMCTM Room Mode\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan style=\"line-height: 1.4;\"\u003eCorrection system with calibration microphone measures and automatically compensates for low frequency standing waves and boundary conditions\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan style=\"line-height: 1.4;\"\u003eHarman HiQnetTM Network Protocol enables system-wide control of level, EQ, input selection, solo and more\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan style=\"line-height: 1.4;\"\u003eWireless remote control and LSR4300\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan style=\"line-height: 1.4;\"\u003eControl Center Software enable control from the listening position\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan style=\"line-height: 1.4;\"\u003eAES\/EBU, S\/PDIF digital inputs\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan style=\"line-height: 1.4;\"\u003eBalanced analog input with selectable +4dBu \/ -10 dBV sensitivity\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan style=\"line-height: 1.4;\"\u003eBi-amplified design eliminates the need for external amplification\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan style=\"line-height: 1.4;\"\u003eFront panel output meter with variable brightness displays signal level\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan style=\"line-height: 1.4;\"\u003eCustom designed, self-shielded transducers with neodymium motor structures for exceptional transient response and superb power-handling\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan style=\"line-height: 1.4;\"\u003eIntegrated mounting points allow\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan style=\"line-height: 1.4;\"\u003ewall mounting for greater placement options\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan style=\"line-height: 1.4;\"\u003eBuilt-in handles facilitate optimum positioning\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan style=\"line-height: 1.4;\"\u003eLow and High Frequency\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan style=\"line-height: 1.4;\"\u003eEqualization with factory presets allows tailoring of response to preference, or acoustic conditions in the room\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan style=\"line-height: 1.4;\"\u003eMPN : LSR4328P\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan style=\"line-height: 1.4;\"\u003eUPC : 50036903066\u003c\/span\u003e\u003c\/li\u003e\n\u003c\/ul\u003e"}

{"id":1528191747,"title":"JBL LSR4328P\/5.1 LSR4300 Series Surround Monitoring Pak","handle":"jbl-lsr4328p-5-1-lsr4300-series-surround-monitoring-pak-jlsr4328p51","description":"\u003cdiv class='\"content\"'\u003e\n\u003cdiv class='\"productDescriptionWrapper\"'\u003e\n\u003cp\u003e\u003cstrong\u003eA First-rate 5.1 Monitoring Solution with Room Calibration\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThe JBL LSR4326P 5.1 Surround System is an instant surround solution, incorporating JBL's premier LSR4300 series. The LSR4300 Series boasts the first professional studio monitors with computer connectivity, networking, and automatic room compensation. The JBL LSR4326P 5.1 Surround System offers one LSR4326 Pak with two speakers as well as three LSR4326P speakers. The low end is handled by JBL's LSR4312SP subwoofer. And the LSR4300 Accessory Kit, offering a calibration microphone, remote control, special software, a USB cable, and batteries, is included with the JBL LSR4326P 5.1 Surround System as well.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eJBL LSR4326P 5.1 Surround System at a Glance:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eSupremely accurate reproduction using LSR and RMC technology.\u003c\/li\u003e\n\u003cli\u003ePowerful monitor control from your computer.\u003c\/li\u003e\n\u003cli\u003eFlexible front-panel speaker and system control.\u003c\/li\u003e\n\u003cli\u003ePremium surround solution.\u003c\/li\u003e\n\u003cli\u003eIncludes one LSR4326P Pak, three LSR4326Ps, a sub, and an accessory kit.\u003c\/li\u003e\n\u003cli\u003eSupremely accurate reproduction.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eGreat mixes start with an accurate monitor. The LSR4326P incorporates JBL's Linear Spatial Reference Technology that matches the exact geometry of the 4300's waveguide design with its transducers and crossover network to optimize the frequency response at the mix position. To ensure that this incredibly accurate monitor delivers superb mixes in the room you're working in, JBL's next generation RMC Room Mode Correction system incorporates a powerful analyzer into each speaker that automatically analyzes and compensates for problems caused by low frequency standing waves and proximity to boundaries. Truly putting technology to work, all of this is accomplished by simply plugging the LSR4300 calibration microphone into the speaker and pushing a button. A JBL first, the LSR4300 meter provides a reference of the output from each speaker in the system. The results are a revolution in professional mixing: a calibrated listening environment where the monitors truly work in harmony with the room. This creates a stunningly clear and articulate sound stage enabling reliable mixes that translate faithfully to the outside world.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003ePowerful monitor control from your computer\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eToday's digital production environments are all about precision and control. The LSR4326P's powerful DSP platform provides full system networking and communication. Comprehensive LSR4300 Control Center Software provides total control of all system parameters directly from the workstation desktop. High resolution digital and analog inputs, plus a 'virtual monitor section' with input switching, master volume, mute and solo controls, enhance functionality of the entire system and provide comprehensive control at the mix position. The first professional studio monitor with automatic room compensation, centralized system control, and user-friendly simplicity, the LSR4326P is the most elegant and intelligent advancement of technology on behalf of better mixes ever offered in a studio monitor.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eFlexible front-panel speaker and system control\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eControl of System Level, Individual Speaker SOLO, Input Source Selection, high and low frequency EQ settings, and adjustment of all parameters can be made from each speaker's front panel, with the system's infrared remote control, or with LSR4300 Control Center Software. For unprecedented performance and convenience the LSR4326P incorporates the new Harman Hiqnet protocol that enables a coordinated calibration of all speakers, intelligent configuration of surround sound systems, and synchronized control of all speakers in the system.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003ePremium surround solution\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThe LSR4326P is a bi-amplified system with 6\" woofer and 1\" dome tweeter. Designed for any application from simple stereo mixing to complex surround production, LSR4326P systems can be configured with up to eight main speakers in any desired mix of 6\" and 8\" LSR4328P models. Since the small studio may lack the space to position surround channels at the optimal physical distance from the mix position, the system is automatically aligned so the sound arriving at the mix position from all speakers is synchronized producing a precise image regardless of each speaker's actual physical placement.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eIncludes one LSR4326P Pak, three LSR4326Ps, a sub, and an accessory kit\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThis JBL LSR4326P 5.1 Surround system offers on LSR4326P Pak with two monitors. In addition, you get three more of the LSR4326Ps as well as the LSR4312SP subwoofer. This package also offers JBL's LSR4300 Accessory Kit, providing a measurement microphone and LSR4300 Control Center software for exceptional calibration, as well as a remote control, USB cable, and batteries.\u003c\/p\u003e\n\u003ch5\u003eFEATURES\u003c\/h5\u003e\n\u003cul\u003e\n\u003cli\u003e\u003cspan style=\"line-height: 1.4;\"\u003eIncludes one LSR4326P Pak, 3 LSR4326Ps, one LSR4312SP subwoofer, and one LSR4300 Accessory Kit\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan style=\"line-height: 1.4;\"\u003eBi-amplified monitors with JBL DSP-enabled RMC Room Mode Correction system.\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan style=\"line-height: 1.4;\"\u003e6\" polymer-coated fiber low-frequency transducer with self-shielded neodymium magnet structure\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan style=\"line-height: 1.4;\"\u003e1\" soft-dome tweeter with self-shielded neodymium magnet structure and ferro fluid cooling\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan style=\"line-height: 1.4;\"\u003e150 watts amplification for LF\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan style=\"line-height: 1.4;\"\u003e70 watts amplification for HF\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan style=\"line-height: 1.4;\"\u003eXLR and 1\/4\" balanced analog inputs\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan style=\"line-height: 1.4;\"\u003eAES\/EBU and S\/PDIF digital inputs\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan style=\"line-height: 1.4;\"\u003eIntegrated processing provides Automated Room Mode Correction, and compensation for speaker-to-speaker placement variations\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan style=\"line-height: 1.4;\"\u003eFront panel includes output level meter and user controls\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan style=\"line-height: 1.4;\"\u003eHarman HiQnet network and USB computer interface provide centralized control of entire system from any speaker\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan style=\"line-height: 1.4;\"\u003eNetwork cable included\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan style=\"line-height: 1.4;\"\u003eLSR4312SP 12\" subwoofer offers 450 watts\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan style=\"line-height: 1.4;\"\u003eMPN : LSR4328P51\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan style=\"line-height: 1.4;\"\u003eUPC : 50036902762\u003c\/span\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cdiv class='\"emptyClear\"'\u003e\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e","published_at":"2015-07-09T06:00:00-07:00","created_at":"2015-07-09T06:00:35-07:00","vendor":"JBL","type":"Studio Monitors","tags":["50036902762","cf-type-studio-monitors","cf-vendor-jbl","jbl lsr4328p5.1 lsr4328p\/5.1","lsr4300","monitoring","pak","series","speakers\/monitors","surround"],"price":464536,"price_min":464536,"price_max":464536,"available":true,"price_varies":false,"compare_at_price":550000,"compare_at_price_min":550000,"compare_at_price_max":550000,"compare_at_price_varies":false,"variants":[{"id":4571665987,"title":"Default Title","option1":"Default Title","option2":null,"option3":null,"sku":"JLSR4328P51","requires_shipping":true,"taxable":true,"featured_image":null,"available":true,"name":"JBL LSR4328P\/5.1 LSR4300 Series Surround Monitoring Pak","public_title":null,"options":["Default Title"],"price":464536,"weight":10433,"compare_at_price":550000,"inventory_quantity":11,"inventory_management":null,"inventory_policy":"deny","barcode":"50036902762","requires_selling_plan":false,"selling_plan_allocations":[]}],"images":["\/\/cdn.shopify.com\/s\/files\/1\/0879\/4068\/products\/main-750x750_beadd773-3a1e-424b-9dbb-660b4496b353.jpeg?v=1436446835"],"featured_image":"\/\/cdn.shopify.com\/s\/files\/1\/0879\/4068\/products\/main-750x750_beadd773-3a1e-424b-9dbb-660b4496b353.jpeg?v=1436446835","options":["Title"],"media":[{"alt":"JBL LSR4328P\/5.1 LSR4300 Series Surround Monitoring Pak","id":20886487139,"position":1,"preview_image":{"aspect_ratio":1.0,"height":750,"width":750,"src":"https:\/\/cdn.shopify.com\/s\/files\/1\/0879\/4068\/products\/main-750x750_beadd773-3a1e-424b-9dbb-660b4496b353.jpeg?v=1568697148"},"aspect_ratio":1.0,"height":750,"media_type":"image","src":"https:\/\/cdn.shopify.com\/s\/files\/1\/0879\/4068\/products\/main-750x750_beadd773-3a1e-424b-9dbb-660b4496b353.jpeg?v=1568697148","width":750}],"requires_selling_plan":false,"selling_plan_groups":[],"content":"\u003cdiv class='\"content\"'\u003e\n\u003cdiv class='\"productDescriptionWrapper\"'\u003e\n\u003cp\u003e\u003cstrong\u003eA First-rate 5.1 Monitoring Solution with Room Calibration\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThe JBL LSR4326P 5.1 Surround System is an instant surround solution, incorporating JBL's premier LSR4300 series. The LSR4300 Series boasts the first professional studio monitors with computer connectivity, networking, and automatic room compensation. The JBL LSR4326P 5.1 Surround System offers one LSR4326 Pak with two speakers as well as three LSR4326P speakers. The low end is handled by JBL's LSR4312SP subwoofer. And the LSR4300 Accessory Kit, offering a calibration microphone, remote control, special software, a USB cable, and batteries, is included with the JBL LSR4326P 5.1 Surround System as well.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eJBL LSR4326P 5.1 Surround System at a Glance:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eSupremely accurate reproduction using LSR and RMC technology.\u003c\/li\u003e\n\u003cli\u003ePowerful monitor control from your computer.\u003c\/li\u003e\n\u003cli\u003eFlexible front-panel speaker and system control.\u003c\/li\u003e\n\u003cli\u003ePremium surround solution.\u003c\/li\u003e\n\u003cli\u003eIncludes one LSR4326P Pak, three LSR4326Ps, a sub, and an accessory kit.\u003c\/li\u003e\n\u003cli\u003eSupremely accurate reproduction.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eGreat mixes start with an accurate monitor. The LSR4326P incorporates JBL's Linear Spatial Reference Technology that matches the exact geometry of the 4300's waveguide design with its transducers and crossover network to optimize the frequency response at the mix position. To ensure that this incredibly accurate monitor delivers superb mixes in the room you're working in, JBL's next generation RMC Room Mode Correction system incorporates a powerful analyzer into each speaker that automatically analyzes and compensates for problems caused by low frequency standing waves and proximity to boundaries. Truly putting technology to work, all of this is accomplished by simply plugging the LSR4300 calibration microphone into the speaker and pushing a button. A JBL first, the LSR4300 meter provides a reference of the output from each speaker in the system. The results are a revolution in professional mixing: a calibrated listening environment where the monitors truly work in harmony with the room. This creates a stunningly clear and articulate sound stage enabling reliable mixes that translate faithfully to the outside world.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003ePowerful monitor control from your computer\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eToday's digital production environments are all about precision and control. The LSR4326P's powerful DSP platform provides full system networking and communication. Comprehensive LSR4300 Control Center Software provides total control of all system parameters directly from the workstation desktop. High resolution digital and analog inputs, plus a 'virtual monitor section' with input switching, master volume, mute and solo controls, enhance functionality of the entire system and provide comprehensive control at the mix position. The first professional studio monitor with automatic room compensation, centralized system control, and user-friendly simplicity, the LSR4326P is the most elegant and intelligent advancement of technology on behalf of better mixes ever offered in a studio monitor.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eFlexible front-panel speaker and system control\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eControl of System Level, Individual Speaker SOLO, Input Source Selection, high and low frequency EQ settings, and adjustment of all parameters can be made from each speaker's front panel, with the system's infrared remote control, or with LSR4300 Control Center Software. For unprecedented performance and convenience the LSR4326P incorporates the new Harman Hiqnet protocol that enables a coordinated calibration of all speakers, intelligent configuration of surround sound systems, and synchronized control of all speakers in the system.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003ePremium surround solution\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThe LSR4326P is a bi-amplified system with 6\" woofer and 1\" dome tweeter. Designed for any application from simple stereo mixing to complex surround production, LSR4326P systems can be configured with up to eight main speakers in any desired mix of 6\" and 8\" LSR4328P models. Since the small studio may lack the space to position surround channels at the optimal physical distance from the mix position, the system is automatically aligned so the sound arriving at the mix position from all speakers is synchronized producing a precise image regardless of each speaker's actual physical placement.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eIncludes one LSR4326P Pak, three LSR4326Ps, a sub, and an accessory kit\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThis JBL LSR4326P 5.1 Surround system offers on LSR4326P Pak with two monitors. In addition, you get three more of the LSR4326Ps as well as the LSR4312SP subwoofer. This package also offers JBL's LSR4300 Accessory Kit, providing a measurement microphone and LSR4300 Control Center software for exceptional calibration, as well as a remote control, USB cable, and batteries.\u003c\/p\u003e\n\u003ch5\u003eFEATURES\u003c\/h5\u003e\n\u003cul\u003e\n\u003cli\u003e\u003cspan style=\"line-height: 1.4;\"\u003eIncludes one LSR4326P Pak, 3 LSR4326Ps, one LSR4312SP subwoofer, and one LSR4300 Accessory Kit\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan style=\"line-height: 1.4;\"\u003eBi-amplified monitors with JBL DSP-enabled RMC Room Mode Correction system.\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan style=\"line-height: 1.4;\"\u003e6\" polymer-coated fiber low-frequency transducer with self-shielded neodymium magnet structure\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan style=\"line-height: 1.4;\"\u003e1\" soft-dome tweeter with self-shielded neodymium magnet structure and ferro fluid cooling\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan style=\"line-height: 1.4;\"\u003e150 watts amplification for LF\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan style=\"line-height: 1.4;\"\u003e70 watts amplification for HF\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan style=\"line-height: 1.4;\"\u003eXLR and 1\/4\" balanced analog inputs\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan style=\"line-height: 1.4;\"\u003eAES\/EBU and S\/PDIF digital inputs\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan style=\"line-height: 1.4;\"\u003eIntegrated processing provides Automated Room Mode Correction, and compensation for speaker-to-speaker placement variations\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan style=\"line-height: 1.4;\"\u003eFront panel includes output level meter and user controls\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan style=\"line-height: 1.4;\"\u003eHarman HiQnet network and USB computer interface provide centralized control of entire system from any speaker\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan style=\"line-height: 1.4;\"\u003eNetwork cable included\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan style=\"line-height: 1.4;\"\u003eLSR4312SP 12\" subwoofer offers 450 watts\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan style=\"line-height: 1.4;\"\u003eMPN : LSR4328P51\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan style=\"line-height: 1.4;\"\u003eUPC : 50036902762\u003c\/span\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cdiv class='\"emptyClear\"'\u003e\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e"}

{"id":1528191555,"title":"JBL LSR6312SP Active Subwoofer - LSR6312SP","handle":"jbl-lsr6312sp-active-subwoofer-jlsr6312sp","description":"\u003cp\u003e\u003cstrong\u003eMore Bass\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eJBL LSR6312SP Active Subwoofer\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThe LSR6312SP powered subwoofer is based on a 12\" woofer with JBL's patented Neodymium Differential Drive NDD and 250W of power. An integral bass-management system provides all the features you need for multiformat surround production: LCR and Direct LFE inputs, summed output for chaining multiple subwoofers, -4dB alignment setting, and JBL's RMC (Room Mode Correction) system. RMC Calibration Kit included. This JBL speaker is the perfect low-frequency partner for a set of JBL LSR6328Ps \u003c\/p\u003e\n\u003ch5\u003eFEATURES\u003c\/h5\u003e\n\u003cul\u003e\n\u003cli\u003e\u003cspan style=\"line-height: 1.4;\"\u003eMultiformat powered subwoofer\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan style=\"line-height: 1.4;\"\u003eHandling for Dolby Prologic, AC-3, DTS and other surround formats\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan style=\"line-height: 1.4;\"\u003eRMC Room Mode Correction controls response peaks due to room space\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan style=\"line-height: 1.4;\"\u003eRMC Calibration Kit included\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan style=\"line-height: 1.4;\"\u003e250W continuous output power amplifier\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan style=\"line-height: 1.4;\"\u003eSophisticated LCR bass management system\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan style=\"line-height: 1.4;\"\u003eDirect LFE input with selectable 10dB input sensitivity\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan style=\"line-height: 1.4;\"\u003eSummed output allows chaining of multiple units\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan style=\"line-height: 1.4;\"\u003eNeodymium Differential Drive NDD technology\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan style=\"line-height: 1.4;\"\u003eDynamic braking for extended LF response and low power compression\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan style=\"line-height: 1.4;\"\u003eHigh-density baffle for low resonance and stable inertial ground\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan style=\"line-height: 1.4;\"\u003eLinear Dynamics Aperture port design eliminates port turbulence and reduces port compression\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan style=\"line-height: 1.4;\"\u003eReinforced enclosure and convenient mounting points for mounted installation\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan style=\"line-height: 1.4;\"\u003eMPN : LSR6312SP\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan style=\"line-height: 1.4;\"\u003eUPC : 50036902946\u003c\/span\u003e\u003c\/li\u003e\n\u003c\/ul\u003e","published_at":"2015-07-09T06:00:00-07:00","created_at":"2015-07-09T06:00:34-07:00","vendor":"JBL","type":"Sub Woofer","tags":["50036902946","cf-type-sub-woofer","cf-vendor-jbl","jbl lsr6312sp active","speakers\/monitors","subwoofer","yamaha"],"price":167900,"price_min":167900,"price_max":167900,"available":true,"price_varies":false,"compare_at_price":199999,"compare_at_price_min":199999,"compare_at_price_max":199999,"compare_at_price_varies":false,"variants":[{"id":4571659907,"title":"Default Title","option1":"Default Title","option2":null,"option3":null,"sku":"JLSR6312SP","requires_shipping":true,"taxable":true,"featured_image":null,"available":true,"name":"JBL LSR6312SP Active Subwoofer - LSR6312SP","public_title":null,"options":["Default Title"],"price":167900,"weight":23133,"compare_at_price":199999,"inventory_quantity":11,"inventory_management":null,"inventory_policy":"deny","barcode":"50036902946","requires_selling_plan":false,"selling_plan_allocations":[]}],"images":["\/\/cdn.shopify.com\/s\/files\/1\/0879\/4068\/products\/main-750x750_b6509399-2668-4ea1-a1a2-33ca999bc5a1.jpeg?v=1436446834"],"featured_image":"\/\/cdn.shopify.com\/s\/files\/1\/0879\/4068\/products\/main-750x750_b6509399-2668-4ea1-a1a2-33ca999bc5a1.jpeg?v=1436446834","options":["Title"],"media":[{"alt":"JBL LSR6312SP Active Subwoofer","id":20886454371,"position":1,"preview_image":{"aspect_ratio":1.0,"height":750,"width":750,"src":"https:\/\/cdn.shopify.com\/s\/files\/1\/0879\/4068\/products\/main-750x750_b6509399-2668-4ea1-a1a2-33ca999bc5a1.jpeg?v=1568697148"},"aspect_ratio":1.0,"height":750,"media_type":"image","src":"https:\/\/cdn.shopify.com\/s\/files\/1\/0879\/4068\/products\/main-750x750_b6509399-2668-4ea1-a1a2-33ca999bc5a1.jpeg?v=1568697148","width":750}],"requires_selling_plan":false,"selling_plan_groups":[],"content":"\u003cp\u003e\u003cstrong\u003eMore Bass\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eJBL LSR6312SP Active Subwoofer\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThe LSR6312SP powered subwoofer is based on a 12\" woofer with JBL's patented Neodymium Differential Drive NDD and 250W of power. An integral bass-management system provides all the features you need for multiformat surround production: LCR and Direct LFE inputs, summed output for chaining multiple subwoofers, -4dB alignment setting, and JBL's RMC (Room Mode Correction) system. RMC Calibration Kit included. This JBL speaker is the perfect low-frequency partner for a set of JBL LSR6328Ps \u003c\/p\u003e\n\u003ch5\u003eFEATURES\u003c\/h5\u003e\n\u003cul\u003e\n\u003cli\u003e\u003cspan style=\"line-height: 1.4;\"\u003eMultiformat powered subwoofer\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan style=\"line-height: 1.4;\"\u003eHandling for Dolby Prologic, AC-3, DTS and other surround formats\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan style=\"line-height: 1.4;\"\u003eRMC Room Mode Correction controls response peaks due to room space\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan style=\"line-height: 1.4;\"\u003eRMC Calibration Kit included\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan style=\"line-height: 1.4;\"\u003e250W continuous output power amplifier\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan style=\"line-height: 1.4;\"\u003eSophisticated LCR bass management system\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan style=\"line-height: 1.4;\"\u003eDirect LFE input with selectable 10dB input sensitivity\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan style=\"line-height: 1.4;\"\u003eSummed output allows chaining of multiple units\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan style=\"line-height: 1.4;\"\u003eNeodymium Differential Drive NDD technology\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan style=\"line-height: 1.4;\"\u003eDynamic braking for extended LF response and low power compression\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan style=\"line-height: 1.4;\"\u003eHigh-density baffle for low resonance and stable inertial ground\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan style=\"line-height: 1.4;\"\u003eLinear Dynamics Aperture port design eliminates port turbulence and reduces port compression\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan style=\"line-height: 1.4;\"\u003eReinforced enclosure and convenient mounting points for mounted installation\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan style=\"line-height: 1.4;\"\u003eMPN : LSR6312SP\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan style=\"line-height: 1.4;\"\u003eUPC : 50036902946\u003c\/span\u003e\u003c\/li\u003e\n\u003c\/ul\u003e"}

{"id":1528191107,"title":"JBL LSR6325P Near-Field Active Studio Monitor - LSR6325P","handle":"jbl-lsr6325p-near-field-active-studio-monitor-jlsr6325p1","description":"\u003cdiv class='\"content\"'\u003e\n\u003cdiv class='\"productDescriptionWrapper\"'\u003e\n\u003cdiv class='\"emptyClear\"'\u003e\n\u003cp\u003e\u003cstrong\u003eFlexible positioning with astounding accuracy\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThe biamplified JBL LSR6325P Near-Field Active Studio Monitor is based on a 5.25\" high-excursion low frequency transducer powered by a 100W RMS amplifier and a 1\" damped titanium-composite high frequency transducer powered by a 50W RMS amplifier. Housed in a cast aluminum enclosure with the dark graphite finish of the LSR6300 line, the JBL LSR6325P monitor produces very flat frequency response +1.5dB\/-2dB 20kHz—70Hz with bass extension —10dB @ 48Hz and peak SPL of 109dB at 1 meter.\u003c\/p\u003e\n\u003cp\u003eThis near-field studio monitor from JBL includes innovative technologies to overcome problems in the room and to optimize response at the mix position. Due to irregular off-axis response, a speaker that measures \"flat\" on-axis in an anechoic chamber may not produce flat response at the mix position. JBL's Linear Spatial Reference technology ensures that the mid and high-frequency content that reaches the mix position is also smooth and accurate. This is accomplished by engineering into the system a ±30° horizontal, and ±15° vertical, radiated response. Using LSR technology, the mid and high-frequency response is flatter at the mix position, regardless of working distance.\u003c\/p\u003e\n\u003cp\u003eTo correct frequency response and overcome spectral shift when the system is mounted on a wall, in a corner, or on a work surface, a boundary compensation setting is included in JBL LSR6325P.\u003c\/p\u003e\n\u003cp\u003eWhen used in conjunction with the LSR6312SP Subwoofer and its integrated JBL RMC Room Mode Correction system, a LSR6325P system from JBL produces exceptional accuracy at the mix position from 20kHz to below 30Hz.\u003c\/p\u003e\n\u003cp\u003eTo meet the requirements of a broad range of recording and broadcast applications, the JBL LSR6325P monitor includes balanced +4 dBu XLR and unbalanced -10 dBV RCA inputs, user settings, and a convenient front-panel volume control and power switch. To optimize positioning in stereo and multichannel production rooms, the LSR6325P monitor includes mounting points for use with readily available mounting brackets. The JBL LSR6325P monitor system is magnetically shielded for use near CRT monitors and is THX pm3 approved for use in demanding production applications.\u003c\/p\u003e\n\u003ch5\u003eFEATURES\u003c\/h5\u003e\n\u003cul\u003e\n\u003cli\u003e\u003cspan style=\"line-height: 1.4;\"\u003e100W RMS amplifier powers a 5.25\" woofer\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan style=\"line-height: 1.4;\"\u003e50W RMS powers high-frequency transducer\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan style=\"line-height: 1.4;\"\u003eCast aluminum enclosure\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan style=\"line-height: 1.4;\"\u003eVery flat frequency response\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan style=\"line-height: 1.4;\"\u003eLinear Spatial Reference technology ensures smooth and accurate mid- and high-frequency content at the mix position\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan style=\"line-height: 1.4;\"\u003eUser-selectable boundary compensation settings correct spectral shift and assure a flat response when speakers are mounted on wall or set on a working surface\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan style=\"line-height: 1.4;\"\u003eHigh-pass filtering for use with optional subwoofer\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan style=\"line-height: 1.4;\"\u003eUnmatched accuracy in smaller production rooms\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan style=\"line-height: 1.4;\"\u003eBalanced +4 dBu XLR and unbalanced -10 dBV RCA inputs\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan style=\"line-height: 1.4;\"\u003eConvenient front-panel volume control and power switch\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan style=\"line-height: 1.4;\"\u003eMagnetically shielded for use near CRT monitors\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan style=\"line-height: 1.4;\"\u003eMPN : LSR6325P\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan style=\"line-height: 1.4;\"\u003eUPC : 50036902847\u003c\/span\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cdiv id=\"featuresContainer\"\u003e\n\u003cdiv class=\"specs\"\u003e\n\u003cul\u003e\u003c\/ul\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e","published_at":"2015-07-09T06:00:00-07:00","created_at":"2015-07-09T06:00:33-07:00","vendor":"JBL","type":"Studio Monitors","tags":["50036902847","active","cf-type-studio-monitors","cf-vendor-jbl","jbl lsr6325p-1 near-field","monitor","speakers\/monitors","studio","yamaha"],"price":45900,"price_min":45900,"price_max":45900,"available":true,"price_varies":false,"compare_at_price":59999,"compare_at_price_min":59999,"compare_at_price_max":59999,"compare_at_price_varies":false,"variants":[{"id":4571648387,"title":"Default Title","option1":"Default Title","option2":null,"option3":null,"sku":"JLSR6325P1","requires_shipping":true,"taxable":true,"featured_image":null,"available":true,"name":"JBL LSR6325P Near-Field Active Studio Monitor - LSR6325P","public_title":null,"options":["Default Title"],"price":45900,"weight":9888,"compare_at_price":59999,"inventory_quantity":11,"inventory_management":null,"inventory_policy":"deny","barcode":"50036902847","requires_selling_plan":false,"selling_plan_allocations":[]}],"images":["\/\/cdn.shopify.com\/s\/files\/1\/0879\/4068\/products\/main-750x750_52196cb3-31c1-430f-9b8f-b863424e0d13.jpeg?v=1436446833"],"featured_image":"\/\/cdn.shopify.com\/s\/files\/1\/0879\/4068\/products\/main-750x750_52196cb3-31c1-430f-9b8f-b863424e0d13.jpeg?v=1436446833","options":["Title"],"media":[{"alt":"JBL LSR6325P Near-Field Active Studio Monitor","id":20886421603,"position":1,"preview_image":{"aspect_ratio":1.0,"height":750,"width":750,"src":"https:\/\/cdn.shopify.com\/s\/files\/1\/0879\/4068\/products\/main-750x750_52196cb3-31c1-430f-9b8f-b863424e0d13.jpeg?v=1568697148"},"aspect_ratio":1.0,"height":750,"media_type":"image","src":"https:\/\/cdn.shopify.com\/s\/files\/1\/0879\/4068\/products\/main-750x750_52196cb3-31c1-430f-9b8f-b863424e0d13.jpeg?v=1568697148","width":750}],"requires_selling_plan":false,"selling_plan_groups":[],"content":"\u003cdiv class='\"content\"'\u003e\n\u003cdiv class='\"productDescriptionWrapper\"'\u003e\n\u003cdiv class='\"emptyClear\"'\u003e\n\u003cp\u003e\u003cstrong\u003eFlexible positioning with astounding accuracy\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThe biamplified JBL LSR6325P Near-Field Active Studio Monitor is based on a 5.25\" high-excursion low frequency transducer powered by a 100W RMS amplifier and a 1\" damped titanium-composite high frequency transducer powered by a 50W RMS amplifier. Housed in a cast aluminum enclosure with the dark graphite finish of the LSR6300 line, the JBL LSR6325P monitor produces very flat frequency response +1.5dB\/-2dB 20kHz—70Hz with bass extension —10dB @ 48Hz and peak SPL of 109dB at 1 meter.\u003c\/p\u003e\n\u003cp\u003eThis near-field studio monitor from JBL includes innovative technologies to overcome problems in the room and to optimize response at the mix position. Due to irregular off-axis response, a speaker that measures \"flat\" on-axis in an anechoic chamber may not produce flat response at the mix position. JBL's Linear Spatial Reference technology ensures that the mid and high-frequency content that reaches the mix position is also smooth and accurate. This is accomplished by engineering into the system a ±30° horizontal, and ±15° vertical, radiated response. Using LSR technology, the mid and high-frequency response is flatter at the mix position, regardless of working distance.\u003c\/p\u003e\n\u003cp\u003eTo correct frequency response and overcome spectral shift when the system is mounted on a wall, in a corner, or on a work surface, a boundary compensation setting is included in JBL LSR6325P.\u003c\/p\u003e\n\u003cp\u003eWhen used in conjunction with the LSR6312SP Subwoofer and its integrated JBL RMC Room Mode Correction system, a LSR6325P system from JBL produces exceptional accuracy at the mix position from 20kHz to below 30Hz.\u003c\/p\u003e\n\u003cp\u003eTo meet the requirements of a broad range of recording and broadcast applications, the JBL LSR6325P monitor includes balanced +4 dBu XLR and unbalanced -10 dBV RCA inputs, user settings, and a convenient front-panel volume control and power switch. To optimize positioning in stereo and multichannel production rooms, the LSR6325P monitor includes mounting points for use with readily available mounting brackets. The JBL LSR6325P monitor system is magnetically shielded for use near CRT monitors and is THX pm3 approved for use in demanding production applications.\u003c\/p\u003e\n\u003ch5\u003eFEATURES\u003c\/h5\u003e\n\u003cul\u003e\n\u003cli\u003e\u003cspan style=\"line-height: 1.4;\"\u003e100W RMS amplifier powers a 5.25\" woofer\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan style=\"line-height: 1.4;\"\u003e50W RMS powers high-frequency transducer\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan style=\"line-height: 1.4;\"\u003eCast aluminum enclosure\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan style=\"line-height: 1.4;\"\u003eVery flat frequency response\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan style=\"line-height: 1.4;\"\u003eLinear Spatial Reference technology ensures smooth and accurate mid- and high-frequency content at the mix position\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan style=\"line-height: 1.4;\"\u003eUser-selectable boundary compensation settings correct spectral shift and assure a flat response when speakers are mounted on wall or set on a working surface\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan style=\"line-height: 1.4;\"\u003eHigh-pass filtering for use with optional subwoofer\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan style=\"line-height: 1.4;\"\u003eUnmatched accuracy in smaller production rooms\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan style=\"line-height: 1.4;\"\u003eBalanced +4 dBu XLR and unbalanced -10 dBV RCA inputs\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan style=\"line-height: 1.4;\"\u003eConvenient front-panel volume control and power switch\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan style=\"line-height: 1.4;\"\u003eMagnetically shielded for use near CRT monitors\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan style=\"line-height: 1.4;\"\u003eMPN : LSR6325P\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan style=\"line-height: 1.4;\"\u003eUPC : 50036902847\u003c\/span\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cdiv id=\"featuresContainer\"\u003e\n\u003cdiv class=\"specs\"\u003e\n\u003cul\u003e\u003c\/ul\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e"}

{"id":1528190787,"title":"JBL LSR6328P Nearfield Active Studio Monitor - LSR6328P","handle":"jbl-lsr6328p-nearfield-active-studio-monitor-lsr6328p","description":"\u003cp\u003eThis monitor is an excellent choice for professional audio applications where accuracy and high SPLs are required, especially in post audio and multichannel monitoring. With ruler-flat +1dB\/-1.5dB response from 50Hz to 20kHz, low frequency extension to 36Hz, boundary compensation and JBL's RMC (Room Mode Correction) system, it gives you exceptional low frequency performance in any space. It includes a biamp system with a 250W LF amplifier and a 120W HF amplifier. 8\" LF driver. 1\" high frequency driver. Wall-mounting provisions make it perfect for installation in multichannel editing rooms.\u003c\/p\u003e\n\u003ch5\u003eFEATURES\u003c\/h5\u003e\n\u003cul\u003e\n\u003cli\u003eDifferential Drive technology with dynamic braking for extended LF response and minimal power compression.\u003c\/li\u003e\n\u003cli\u003eIntegrated biamplification with factory calibrated sensitivities\u003c\/li\u003e\n\u003cli\u003eAdvanced Linear Spatial Reference design ensures flatter-off-axis response for greater clarity at the mix position\u003c\/li\u003e\n\u003cli\u003eTitanium composite HF transducer with Elliptical Oblate Spheroidal waveguide for precise pattern control\u003c\/li\u003e\n\u003cli\u003eRoom Mode Correction (RMC) provides electronic control of room modes\u003c\/li\u003e\n\u003cli\u003eMagnetically shielded high-frequency transducer minimizes interference when used in close proximity to video monitors\u003c\/li\u003e\n\u003cli\u003eUser measurement and calibration kit available\u003c\/li\u003e\n\u003cli\u003eHigh-density baffle for low enclosure resonance\u003c\/li\u003e\n\u003cli\u003eLinear Dynamics Aperture port design eliminates port turbulence and reduces port compression\u003c\/li\u003e\n\u003cli\u003eMPN : LSR6328P\u003c\/li\u003e\n\u003cli\u003eUPC : 50036903653\u003c\/li\u003e\n\u003c\/ul\u003e","published_at":"2015-07-09T06:00:00-07:00","created_at":"2015-07-09T06:00:31-07:00","vendor":"JBL","type":"Studio Monitors","tags":["50036903653","active","cf-type-studio-monitors","cf-vendor-jbl","jbl lsr6328p nearfield","monitor","speakers\/monitors","studio"],"price":150900,"price_min":150900,"price_max":150900,"available":true,"price_varies":false,"compare_at_price":189999,"compare_at_price_min":189999,"compare_at_price_max":189999,"compare_at_price_varies":false,"variants":[{"id":4571639491,"title":"Default Title","option1":"Default Title","option2":null,"option3":null,"sku":"LSR6328P","requires_shipping":true,"taxable":true,"featured_image":null,"available":true,"name":"JBL LSR6328P Nearfield Active Studio Monitor - LSR6328P","public_title":null,"options":["Default Title"],"price":150900,"weight":22680,"compare_at_price":189999,"inventory_quantity":11,"inventory_management":null,"inventory_policy":"deny","barcode":"50036903653","requires_selling_plan":false,"selling_plan_allocations":[]}],"images":["\/\/cdn.shopify.com\/s\/files\/1\/0879\/4068\/products\/main-750x750_752772b8-abae-4475-a2fb-306d11993384.jpeg?v=1436446831"],"featured_image":"\/\/cdn.shopify.com\/s\/files\/1\/0879\/4068\/products\/main-750x750_752772b8-abae-4475-a2fb-306d11993384.jpeg?v=1436446831","options":["Title"],"media":[{"alt":"JBL LSR6328P Nearfield Active Studio Monitor","id":20886388835,"position":1,"preview_image":{"aspect_ratio":1.0,"height":750,"width":750,"src":"https:\/\/cdn.shopify.com\/s\/files\/1\/0879\/4068\/products\/main-750x750_752772b8-abae-4475-a2fb-306d11993384.jpeg?v=1568697148"},"aspect_ratio":1.0,"height":750,"media_type":"image","src":"https:\/\/cdn.shopify.com\/s\/files\/1\/0879\/4068\/products\/main-750x750_752772b8-abae-4475-a2fb-306d11993384.jpeg?v=1568697148","width":750}],"requires_selling_plan":false,"selling_plan_groups":[],"content":"\u003cp\u003eThis monitor is an excellent choice for professional audio applications where accuracy and high SPLs are required, especially in post audio and multichannel monitoring. With ruler-flat +1dB\/-1.5dB response from 50Hz to 20kHz, low frequency extension to 36Hz, boundary compensation and JBL's RMC (Room Mode Correction) system, it gives you exceptional low frequency performance in any space. It includes a biamp system with a 250W LF amplifier and a 120W HF amplifier. 8\" LF driver. 1\" high frequency driver. Wall-mounting provisions make it perfect for installation in multichannel editing rooms.\u003c\/p\u003e\n\u003ch5\u003eFEATURES\u003c\/h5\u003e\n\u003cul\u003e\n\u003cli\u003eDifferential Drive technology with dynamic braking for extended LF response and minimal power compression.\u003c\/li\u003e\n\u003cli\u003eIntegrated biamplification with factory calibrated sensitivities\u003c\/li\u003e\n\u003cli\u003eAdvanced Linear Spatial Reference design ensures flatter-off-axis response for greater clarity at the mix position\u003c\/li\u003e\n\u003cli\u003eTitanium composite HF transducer with Elliptical Oblate Spheroidal waveguide for precise pattern control\u003c\/li\u003e\n\u003cli\u003eRoom Mode Correction (RMC) provides electronic control of room modes\u003c\/li\u003e\n\u003cli\u003eMagnetically shielded high-frequency transducer minimizes interference when used in close proximity to video monitors\u003c\/li\u003e\n\u003cli\u003eUser measurement and calibration kit available\u003c\/li\u003e\n\u003cli\u003eHigh-density baffle for low enclosure resonance\u003c\/li\u003e\n\u003cli\u003eLinear Dynamics Aperture port design eliminates port turbulence and reduces port compression\u003c\/li\u003e\n\u003cli\u003eMPN : LSR6328P\u003c\/li\u003e\n\u003cli\u003eUPC : 50036903653\u003c\/li\u003e\n\u003c\/ul\u003e"}

{"id":1528190659,"title":"JBL MSC1 Monitor System Controller with RMC(TM) Room Mode Correction - MSC1 - 889406177512","handle":"jbl-msc1-monitor-system-controller-with-rmc-tm-room-mode-correction-jmsc1","description":"\u003cdiv class='\"content\"'\u003e\n\u003cdiv class='\"productDescriptionWrapper\"'\u003eJBL MSC1 Studio Monitor System Controller; Fine Tune Your Mix Position for Precision Monitoring! Including the essential Monitor Strip feature that is normally reserved for large mixing consoles,JBL's MSC1 provides the user full control of all monitoring functions from the mix position. Room acoustics are the most important part of obtaining the perfect clarity for studio mixing, the MSC1 provides JBL's RMC Room Mode Correction Technology that gives you an easy solution for fine tuning your monitors to even the most imperfect room acoustics. The result? A calibrated reference environment that keeps your monitor speakers in tune with the room so you can finally hear the sound of your music without the interference of nasty room reverberation.\u003cbr\u003e\u003cbr\u003e\n\u003c\/div\u003e\n\u003cdiv class='\"productDescriptionWrapper\"'\u003e\u003c\/div\u003e\n\u003ch5 class='\"productDescriptionWrapper\"'\u003eFEATURES\u003c\/h5\u003e\n\u003cdiv class='\"productDescriptionWrapper\"'\u003e\n\u003cul\u003e\n\u003cli\u003e\u003cspan style=\"line-height: 1.5;\"\u003eControl RMC Calibration MicrophoneMSC1 Control Center Software.\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan style=\"line-height: 1.5;\"\u003eSelectable Cross Over Frequencies Adjustable Low Frequency.\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan style=\"line-height: 1.5;\"\u003eHigh Frequency Speaker EQ Headphone Output with Volume Control Mute Control RMC On\/Bypass.\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003eMaster Volume Control A\/B Speaker Select A\/B\/C input Source Select Subwoofer Output with Level Control.\u003c\/li\u003e\n\u003cli\u003e\u003cspan style=\"line-height: 1.5;\"\u003eMPN : MSC1\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan style=\"line-height: 1.5;\"\u003eUPC : 889406177512\u003c\/span\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e","published_at":"2015-07-09T06:00:00-07:00","created_at":"2015-07-09T06:00:30-07:00","vendor":"JBL","type":"Recording Acc","tags":["889406177512","cf-type-recording-acc","cf-vendor-jbl","controller","correction","jbl msc1 monitor","mode","rmc(tm)","room","speakers\/monitors","system","with"],"price":29900,"price_min":29900,"price_max":29900,"available":true,"price_varies":false,"compare_at_price":39999,"compare_at_price_min":39999,"compare_at_price_max":39999,"compare_at_price_varies":false,"variants":[{"id":4571633027,"title":"Default Title","option1":"Default Title","option2":null,"option3":null,"sku":"JMSC1","requires_shipping":true,"taxable":true,"featured_image":null,"available":true,"name":"JBL MSC1 Monitor System Controller with RMC(TM) Room Mode Correction - MSC1 - 889406177512","public_title":null,"options":["Default Title"],"price":29900,"weight":4536,"compare_at_price":39999,"inventory_quantity":11,"inventory_management":null,"inventory_policy":"deny","barcode":"889406177512","requires_selling_plan":false,"selling_plan_allocations":[]}],"images":["\/\/cdn.shopify.com\/s\/files\/1\/0879\/4068\/products\/main-750x750_143dd162-964e-4ef3-8545-b642696fd819.jpeg?v=1436446830"],"featured_image":"\/\/cdn.shopify.com\/s\/files\/1\/0879\/4068\/products\/main-750x750_143dd162-964e-4ef3-8545-b642696fd819.jpeg?v=1436446830","options":["Title"],"media":[{"alt":"JBL MSC1 Monitor System Controller with RMC(TM) Room Mode Correction","id":20886356067,"position":1,"preview_image":{"aspect_ratio":1.0,"height":750,"width":750,"src":"https:\/\/cdn.shopify.com\/s\/files\/1\/0879\/4068\/products\/main-750x750_143dd162-964e-4ef3-8545-b642696fd819.jpeg?v=1568697148"},"aspect_ratio":1.0,"height":750,"media_type":"image","src":"https:\/\/cdn.shopify.com\/s\/files\/1\/0879\/4068\/products\/main-750x750_143dd162-964e-4ef3-8545-b642696fd819.jpeg?v=1568697148","width":750}],"requires_selling_plan":false,"selling_plan_groups":[],"content":"\u003cdiv class='\"content\"'\u003e\n\u003cdiv class='\"productDescriptionWrapper\"'\u003eJBL MSC1 Studio Monitor System Controller; Fine Tune Your Mix Position for Precision Monitoring! Including the essential Monitor Strip feature that is normally reserved for large mixing consoles,JBL's MSC1 provides the user full control of all monitoring functions from the mix position. Room acoustics are the most important part of obtaining the perfect clarity for studio mixing, the MSC1 provides JBL's RMC Room Mode Correction Technology that gives you an easy solution for fine tuning your monitors to even the most imperfect room acoustics. The result? A calibrated reference environment that keeps your monitor speakers in tune with the room so you can finally hear the sound of your music without the interference of nasty room reverberation.\u003cbr\u003e\u003cbr\u003e\n\u003c\/div\u003e\n\u003cdiv class='\"productDescriptionWrapper\"'\u003e\u003c\/div\u003e\n\u003ch5 class='\"productDescriptionWrapper\"'\u003eFEATURES\u003c\/h5\u003e\n\u003cdiv class='\"productDescriptionWrapper\"'\u003e\n\u003cul\u003e\n\u003cli\u003e\u003cspan style=\"line-height: 1.5;\"\u003eControl RMC Calibration MicrophoneMSC1 Control Center Software.\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan style=\"line-height: 1.5;\"\u003eSelectable Cross Over Frequencies Adjustable Low Frequency.\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan style=\"line-height: 1.5;\"\u003eHigh Frequency Speaker EQ Headphone Output with Volume Control Mute Control RMC On\/Bypass.\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003eMaster Volume Control A\/B Speaker Select A\/B\/C input Source Select Subwoofer Output with Level Control.\u003c\/li\u003e\n\u003cli\u003e\u003cspan style=\"line-height: 1.5;\"\u003eMPN : MSC1\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan style=\"line-height: 1.5;\"\u003eUPC : 889406177512\u003c\/span\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e"}

{"id":1528190339,"title":"JBL PRX412M 12\" 2-Way Stage Monitor and Loudspeaker System - PRX412M","handle":"jbl-prx412m-channel-unpowered-speaker-cabinet-jprx412m","description":"\u003cdiv class='\"content\"'\u003e\n\u003cdiv class='\"productDescriptionWrapper\"'\u003e\n\u003cdiv class='\"emptyClear\"'\u003e\n\u003cp class=\"overviewSubHeading\"\u003e\u003cstrong\u003eProfessional-quality passive speaker\u003c\/strong\u003e\u003c\/p\u003e\n\u003cdiv id=\"detailsContainer\"\u003e\n\u003c!-- Function-YouTubeVideo --\u003e \u003c!-- NO Video URL assigned --\u003e \u003ca name=\"youTubeVideo\"\u003e\u003c\/a\u003e\n\u003cdiv class=\"details\"\u003e\n\u003cp class=\"description\" itemprop=\"description\"\u003eThe JBL PRX412M is a portable, twelve-inch, two-way speaker system designed for either main sound reinforcement or monitoring applications.It is perfect for speech reinforcement of any type, live performance stage monitoring, reinforcement of vocal and acoustic music, and as a high-performance satellite speaker for use with subwoofers.\u003cbr\u003e\u003cbr\u003eIt is lightweight, loud and ruggedly built, designed to withstand the rigors of the road and equipped with twelve M10 suspension points for permanent installation. For travelling bands or for venues seeking high quality, full-range audio reinforcement, it is an ideal professional solution.\u003cbr\u003e\u003cbr\u003ePRX400 passive speakers were designed to provide the sensitivity, frequency response and power handling needed for almost any professional audio environment while still being reasonably priced. Whether you use a powered mixer or an equipment rack full of amps and signal processing, PRX400 passive speakers deliver the sound power and bandwidth necessary to make loud music sound natural and even quiet speech intelligible.\u003cbr\u003e\u003cbr\u003ePRX400 passive speakers are made of tour-tested JBL components and feature professional connectivity via Neutrik Speakon combination connectors. PRX400 cabinets are artfully constructed from an 18mm Birch\/Poplar multi-laminate hardwood covered in highly resilient DuraFlexTM and feature rugged 16 gauge steel grilles.\u003c\/p\u003e\n\u003ch5 class=\"description\" itemprop=\"description\"\u003eFEATURES\u003c\/h5\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cdiv id=\"featuresContainer\"\u003e\n\u003cdiv class=\"specs\"\u003e\n\u003cul\u003e\n\u003cli\u003e\u003cspan style=\"line-height: 1.5;\"\u003e90° x 50° coverage for even and smooth response on and off axis\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan style=\"line-height: 1.5;\"\u003eDual-angle pole socket for applications requiring tripod mounting\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan style=\"line-height: 1.5;\"\u003eHeavy Duty 16 gauge protective screen backed steel grille\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan style=\"line-height: 1.5;\"\u003eTough DuraFlex enclosure finish\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan style=\"line-height: 1.5;\"\u003eFrequency Range: (-10 dB) : 50 Hz - 20 kHz\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan style=\"line-height: 1.5;\"\u003eFrequency Response: (+3 dB) : 62 Hz - 19 kHz\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan style=\"line-height: 1.5;\"\u003eCoverage Pattern: 90° x 50° nominal\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan style=\"line-height: 1.5;\"\u003eSystem Sensitivity: 95 dB SPL (1w@1m)\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan style=\"line-height: 1.5;\"\u003ePower Rating, Pink Noise: 300 W \/ 600 W \/ 1200 W\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan style=\"line-height: 1.5;\"\u003e(Continuous\/Program\/Peak)\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan style=\"line-height: 1.5;\"\u003eRated Maximum SPL: 126 dB SPL peak\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan style=\"line-height: 1.5;\"\u003eNominal Impedance: 8 ohms\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan style=\"line-height: 1.5;\"\u003eDimensions (W xH x D): 574 mm x 353 mm x 399 mm\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan style=\"line-height: 1.5;\"\u003e(22.6\" x 13.9\" x 15.7\")\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan style=\"line-height: 1.5;\"\u003eNet Weight: 35lb\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan style=\"line-height: 1.5;\"\u003eMPN : PRX412M\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan style=\"line-height: 1.5;\"\u003eUPC : 50036904049\u003c\/span\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cul\u003e\u003c\/ul\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cdiv id=\"specsContainer\"\u003e\n\u003cdiv class=\"specs\"\u003e\n\u003cul\u003e\u003c\/ul\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e","published_at":"2015-07-09T06:00:00-07:00","created_at":"2015-07-09T06:00:29-07:00","vendor":"JBL","type":"Studio Monitors","tags":["50036904049","cabinet","cf-type-studio-monitors","cf-vendor-jbl","jbl prx412m channel","speaker","speakers\/monitors","unpowered"],"price":44900,"price_min":44900,"price_max":44900,"available":true,"price_varies":false,"compare_at_price":59999,"compare_at_price_min":59999,"compare_at_price_max":59999,"compare_at_price_varies":false,"variants":[{"id":4571625859,"title":"Default Title","option1":"Default Title","option2":null,"option3":null,"sku":"JPRX412M","requires_shipping":true,"taxable":true,"featured_image":null,"available":true,"name":"JBL PRX412M 12\" 2-Way Stage Monitor and Loudspeaker System - PRX412M","public_title":null,"options":["Default Title"],"price":44900,"weight":9072,"compare_at_price":59999,"inventory_quantity":11,"inventory_management":null,"inventory_policy":"deny","barcode":"50036904049","requires_selling_plan":false,"selling_plan_allocations":[]}],"images":["\/\/cdn.shopify.com\/s\/files\/1\/0879\/4068\/products\/main-750x750_3787e5eb-18bd-47ac-97f0-44082c1b83f1.jpeg?v=1436446829"],"featured_image":"\/\/cdn.shopify.com\/s\/files\/1\/0879\/4068\/products\/main-750x750_3787e5eb-18bd-47ac-97f0-44082c1b83f1.jpeg?v=1436446829","options":["Title"],"media":[{"alt":"JBL PRX412M Channel Unpowered Speaker Cabinet","id":20886323299,"position":1,"preview_image":{"aspect_ratio":1.0,"height":750,"width":750,"src":"https:\/\/cdn.shopify.com\/s\/files\/1\/0879\/4068\/products\/main-750x750_3787e5eb-18bd-47ac-97f0-44082c1b83f1.jpeg?v=1568697147"},"aspect_ratio":1.0,"height":750,"media_type":"image","src":"https:\/\/cdn.shopify.com\/s\/files\/1\/0879\/4068\/products\/main-750x750_3787e5eb-18bd-47ac-97f0-44082c1b83f1.jpeg?v=1568697147","width":750}],"requires_selling_plan":false,"selling_plan_groups":[],"content":"\u003cdiv class='\"content\"'\u003e\n\u003cdiv class='\"productDescriptionWrapper\"'\u003e\n\u003cdiv class='\"emptyClear\"'\u003e\n\u003cp class=\"overviewSubHeading\"\u003e\u003cstrong\u003eProfessional-quality passive speaker\u003c\/strong\u003e\u003c\/p\u003e\n\u003cdiv id=\"detailsContainer\"\u003e\n\u003c!-- Function-YouTubeVideo --\u003e \u003c!-- NO Video URL assigned --\u003e \u003ca name=\"youTubeVideo\"\u003e\u003c\/a\u003e\n\u003cdiv class=\"details\"\u003e\n\u003cp class=\"description\" itemprop=\"description\"\u003eThe JBL PRX412M is a portable, twelve-inch, two-way speaker system designed for either main sound reinforcement or monitoring applications.It is perfect for speech reinforcement of any type, live performance stage monitoring, reinforcement of vocal and acoustic music, and as a high-performance satellite speaker for use with subwoofers.\u003cbr\u003e\u003cbr\u003eIt is lightweight, loud and ruggedly built, designed to withstand the rigors of the road and equipped with twelve M10 suspension points for permanent installation. For travelling bands or for venues seeking high quality, full-range audio reinforcement, it is an ideal professional solution.\u003cbr\u003e\u003cbr\u003ePRX400 passive speakers were designed to provide the sensitivity, frequency response and power handling needed for almost any professional audio environment while still being reasonably priced. Whether you use a powered mixer or an equipment rack full of amps and signal processing, PRX400 passive speakers deliver the sound power and bandwidth necessary to make loud music sound natural and even quiet speech intelligible.\u003cbr\u003e\u003cbr\u003ePRX400 passive speakers are made of tour-tested JBL components and feature professional connectivity via Neutrik Speakon combination connectors. PRX400 cabinets are artfully constructed from an 18mm Birch\/Poplar multi-laminate hardwood covered in highly resilient DuraFlexTM and feature rugged 16 gauge steel grilles.\u003c\/p\u003e\n\u003ch5 class=\"description\" itemprop=\"description\"\u003eFEATURES\u003c\/h5\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cdiv id=\"featuresContainer\"\u003e\n\u003cdiv class=\"specs\"\u003e\n\u003cul\u003e\n\u003cli\u003e\u003cspan style=\"line-height: 1.5;\"\u003e90° x 50° coverage for even and smooth response on and off axis\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan style=\"line-height: 1.5;\"\u003eDual-angle pole socket for applications requiring tripod mounting\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan style=\"line-height: 1.5;\"\u003eHeavy Duty 16 gauge protective screen backed steel grille\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan style=\"line-height: 1.5;\"\u003eTough DuraFlex enclosure finish\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan style=\"line-height: 1.5;\"\u003eFrequency Range: (-10 dB) : 50 Hz - 20 kHz\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan style=\"line-height: 1.5;\"\u003eFrequency Response: (+3 dB) : 62 Hz - 19 kHz\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan style=\"line-height: 1.5;\"\u003eCoverage Pattern: 90° x 50° nominal\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan style=\"line-height: 1.5;\"\u003eSystem Sensitivity: 95 dB SPL (1w@1m)\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan style=\"line-height: 1.5;\"\u003ePower Rating, Pink Noise: 300 W \/ 600 W \/ 1200 W\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan style=\"line-height: 1.5;\"\u003e(Continuous\/Program\/Peak)\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan style=\"line-height: 1.5;\"\u003eRated Maximum SPL: 126 dB SPL peak\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan style=\"line-height: 1.5;\"\u003eNominal Impedance: 8 ohms\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan style=\"line-height: 1.5;\"\u003eDimensions (W xH x D): 574 mm x 353 mm x 399 mm\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan style=\"line-height: 1.5;\"\u003e(22.6\" x 13.9\" x 15.7\")\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan style=\"line-height: 1.5;\"\u003eNet Weight: 35lb\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan style=\"line-height: 1.5;\"\u003eMPN : PRX412M\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan style=\"line-height: 1.5;\"\u003eUPC : 50036904049\u003c\/span\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cul\u003e\u003c\/ul\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cdiv id=\"specsContainer\"\u003e\n\u003cdiv class=\"specs\"\u003e\n\u003cul\u003e\u003c\/ul\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e"}

{"id":1528190019,"title":"JBL PRX415M 15\" 2-Way Stage Monitor and Loudspeaker System","handle":"jbl-prx415m-channel-unpowered-speaker-cabinet-jprx415m","description":"\u003cdiv class='\"content\"'\u003e\n\u003cdiv class='\"productDescriptionWrapper\"'\u003e\n\u003cdiv class='\"emptyClear\"'\u003e\n\u003cp class=\"overviewSubHeading\"\u003e\u003cstrong\u003ePassive loudspeaker with 15\" and a horn\u003c\/strong\u003e\u003c\/p\u003e\n\u003cdiv id=\"detailsContainer\"\u003e\n\u003c!-- Function-YouTubeVideo --\u003e \u003c!-- NO Video URL assigned --\u003e \u003ca name=\"youTubeVideo\"\u003e\u003c\/a\u003e\n\u003cdiv class=\"details\"\u003e\n\u003cp class=\"description\" itemprop=\"description\"\u003eThe JBL PRX412M is a portable, fifteen-inch, two-way speaker system designed for either main sound reinforcement or monitoring applications. It is perfect for speech reinforcement of any type, live performance stage monitoring, reinforcement of vocal and acoustic music or pre-recorded music, and as a high-performance satellite speaker for use with subwoofers.\u003cbr\u003e\u003cbr\u003eIt is lightweight, loud and ruggedly built, designed to withstand the rigors of the road, and are equipped with twelve M10 suspension points for permanent installation. For travelling bands or for venues seeking high quality, full-range audio reinforcement, it is an ideal professional solution.\u003cbr\u003e\u003cbr\u003ePRX400 passive speakers were designed to provide the sensitivity, frequency response and power handling needed for almost any professional audio environment while still being reasonably priced. Whether you use a powered mixer or an equipment rack full of amps and signal processing, PRX400 passive speakers deliver the sound power and bandwidth necessary to make loud music sound natural and even quiet speech intelligible.\u003cbr\u003e\u003cbr\u003ePRX400 passive speakers are made of tour-tested JBL components and feature professional connectivity via Neutrik Speakon combination connectors. PRX400 cabinets are artfully constructed from an 18mm Birch\/Poplar multi-laminate hardwood covered in highly resilient DuraFlexTM and feature rugged 16 gauge steel grilles.\u003c\/p\u003e\n\u003ch5 class=\"description\" itemprop=\"description\"\u003eFEATURES\u003c\/h5\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cdiv id=\"featuresContainer\"\u003e\n\u003cdiv class=\"specs\"\u003e\n\u003cul\u003e\n\u003cli\u003e\u003cspan style=\"line-height: 1.5;\"\u003e90° x 50° coverage\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan style=\"line-height: 1.5;\"\u003eDual-angle pole socket for applications requiring tripod mounting\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan style=\"line-height: 1.5;\"\u003eHeavy Duty 16 gauge protective screen backed steel grille\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan style=\"line-height: 1.5;\"\u003eTough DuraFlex enclosure finish\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan style=\"line-height: 1.5;\"\u003eFrequency Range: (-10 dB) : 55 Hz - 19 kHz\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan style=\"line-height: 1.5;\"\u003eFrequency Response: (+3 dB) : 66 Hz - 16 kHz\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan style=\"line-height: 1.5;\"\u003eCoverage Pattern: 90° x 50° nominal\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan style=\"line-height: 1.5;\"\u003eSystem Sensitivity: 98 dB SPL (1w@1m)\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan style=\"line-height: 1.5;\"\u003ePower Rating, Pink Noise: 300 W \/ 600 W \/ 1200 W\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan style=\"line-height: 1.5;\"\u003e(Continuous\/Program\/Peak)\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan style=\"line-height: 1.5;\"\u003eRated Maximum SPL: 122 dB SPL cont. (128 dB SPL peak)\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan style=\"line-height: 1.5;\"\u003eNominal Impedance: 8 ohms\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan style=\"line-height: 1.5;\"\u003eDimensions (H x W x D): 650 mm x 429 mm x 457 mm\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan style=\"line-height: 1.5;\"\u003e(25.6\" x 16.9\" x 18\")\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan style=\"line-height: 1.5;\"\u003eNet Weight: 21 kg (46lb.)\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan style=\"line-height: 1.5;\"\u003eMPN :PRX415M\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan style=\"line-height: 1.5;\"\u003eUPC : 50036904063\u003c\/span\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cdiv id=\"specsContainer\"\u003e\n\u003cdiv class=\"specs\"\u003e\n\u003cul\u003e\u003c\/ul\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e","published_at":"2015-07-09T06:00:00-07:00","created_at":"2015-07-09T06:00:28-07:00","vendor":"JBL","type":"Monitors","tags":["50036904063","cabinet","cf-type-monitors","cf-vendor-jbl","jbl prx415m channel","QSC","speaker","speakers\/monitors","unpowered","yamaha"],"price":54900,"price_min":54900,"price_max":54900,"available":true,"price_varies":false,"compare_at_price":69999,"compare_at_price_min":69999,"compare_at_price_max":69999,"compare_at_price_varies":false,"variants":[{"id":4571619587,"title":"Default Title","option1":"Default Title","option2":null,"option3":null,"sku":"JPRX415M","requires_shipping":true,"taxable":true,"featured_image":null,"available":true,"name":"JBL PRX415M 15\" 2-Way Stage Monitor and Loudspeaker System","public_title":null,"options":["Default Title"],"price":54900,"weight":9072,"compare_at_price":69999,"inventory_quantity":11,"inventory_management":null,"inventory_policy":"deny","barcode":"50036904063","requires_selling_plan":false,"selling_plan_allocations":[]}],"images":["\/\/cdn.shopify.com\/s\/files\/1\/0879\/4068\/products\/main-750x750_b65eda6b-8d6e-41c0-9f08-9f1c6331f107.jpeg?v=1436446828"],"featured_image":"\/\/cdn.shopify.com\/s\/files\/1\/0879\/4068\/products\/main-750x750_b65eda6b-8d6e-41c0-9f08-9f1c6331f107.jpeg?v=1436446828","options":["Title"],"media":[{"alt":"JBL PRX415M Channel Unpowered Speaker Cabinet","id":20886290531,"position":1,"preview_image":{"aspect_ratio":1.0,"height":750,"width":750,"src":"https:\/\/cdn.shopify.com\/s\/files\/1\/0879\/4068\/products\/main-750x750_b65eda6b-8d6e-41c0-9f08-9f1c6331f107.jpeg?v=1568697147"},"aspect_ratio":1.0,"height":750,"media_type":"image","src":"https:\/\/cdn.shopify.com\/s\/files\/1\/0879\/4068\/products\/main-750x750_b65eda6b-8d6e-41c0-9f08-9f1c6331f107.jpeg?v=1568697147","width":750}],"requires_selling_plan":false,"selling_plan_groups":[],"content":"\u003cdiv class='\"content\"'\u003e\n\u003cdiv class='\"productDescriptionWrapper\"'\u003e\n\u003cdiv class='\"emptyClear\"'\u003e\n\u003cp class=\"overviewSubHeading\"\u003e\u003cstrong\u003ePassive loudspeaker with 15\" and a horn\u003c\/strong\u003e\u003c\/p\u003e\n\u003cdiv id=\"detailsContainer\"\u003e\n\u003c!-- Function-YouTubeVideo --\u003e \u003c!-- NO Video URL assigned --\u003e \u003ca name=\"youTubeVideo\"\u003e\u003c\/a\u003e\n\u003cdiv class=\"details\"\u003e\n\u003cp class=\"description\" itemprop=\"description\"\u003eThe JBL PRX412M is a portable, fifteen-inch, two-way speaker system designed for either main sound reinforcement or monitoring applications. It is perfect for speech reinforcement of any type, live performance stage monitoring, reinforcement of vocal and acoustic music or pre-recorded music, and as a high-performance satellite speaker for use with subwoofers.\u003cbr\u003e\u003cbr\u003eIt is lightweight, loud and ruggedly built, designed to withstand the rigors of the road, and are equipped with twelve M10 suspension points for permanent installation. For travelling bands or for venues seeking high quality, full-range audio reinforcement, it is an ideal professional solution.\u003cbr\u003e\u003cbr\u003ePRX400 passive speakers were designed to provide the sensitivity, frequency response and power handling needed for almost any professional audio environment while still being reasonably priced. Whether you use a powered mixer or an equipment rack full of amps and signal processing, PRX400 passive speakers deliver the sound power and bandwidth necessary to make loud music sound natural and even quiet speech intelligible.\u003cbr\u003e\u003cbr\u003ePRX400 passive speakers are made of tour-tested JBL components and feature professional connectivity via Neutrik Speakon combination connectors. PRX400 cabinets are artfully constructed from an 18mm Birch\/Poplar multi-laminate hardwood covered in highly resilient DuraFlexTM and feature rugged 16 gauge steel grilles.\u003c\/p\u003e\n\u003ch5 class=\"description\" itemprop=\"description\"\u003eFEATURES\u003c\/h5\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cdiv id=\"featuresContainer\"\u003e\n\u003cdiv class=\"specs\"\u003e\n\u003cul\u003e\n\u003cli\u003e\u003cspan style=\"line-height: 1.5;\"\u003e90° x 50° coverage\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan style=\"line-height: 1.5;\"\u003eDual-angle pole socket for applications requiring tripod mounting\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan style=\"line-height: 1.5;\"\u003eHeavy Duty 16 gauge protective screen backed steel grille\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan style=\"line-height: 1.5;\"\u003eTough DuraFlex enclosure finish\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan style=\"line-height: 1.5;\"\u003eFrequency Range: (-10 dB) : 55 Hz - 19 kHz\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan style=\"line-height: 1.5;\"\u003eFrequency Response: (+3 dB) : 66 Hz - 16 kHz\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan style=\"line-height: 1.5;\"\u003eCoverage Pattern: 90° x 50° nominal\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan style=\"line-height: 1.5;\"\u003eSystem Sensitivity: 98 dB SPL (1w@1m)\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan style=\"line-height: 1.5;\"\u003ePower Rating, Pink Noise: 300 W \/ 600 W \/ 1200 W\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan style=\"line-height: 1.5;\"\u003e(Continuous\/Program\/Peak)\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan style=\"line-height: 1.5;\"\u003eRated Maximum SPL: 122 dB SPL cont. (128 dB SPL peak)\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan style=\"line-height: 1.5;\"\u003eNominal Impedance: 8 ohms\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan style=\"line-height: 1.5;\"\u003eDimensions (H x W x D): 650 mm x 429 mm x 457 mm\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan style=\"line-height: 1.5;\"\u003e(25.6\" x 16.9\" x 18\")\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan style=\"line-height: 1.5;\"\u003eNet Weight: 21 kg (46lb.)\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan style=\"line-height: 1.5;\"\u003eMPN :PRX415M\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan style=\"line-height: 1.5;\"\u003eUPC : 50036904063\u003c\/span\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cdiv id=\"specsContainer\"\u003e\n\u003cdiv class=\"specs\"\u003e\n\u003cul\u003e\u003c\/ul\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e"}

{"id":1528189827,"title":"JBL PRX418S Compact 18\" Subwoofer - PRX418S","handle":"jbl-prx418s-18-inch-stage-subwoofer-jprx418s","description":"\u003cdiv class='\"content\"'\u003e\n\u003cdiv class='\"productDescriptionWrapper\"'\u003e\n\u003cdiv class='\"emptyClear\"'\u003e\n\u003cp class=\"overviewSubHeading\"\u003e\u003cstrong\u003eEarth-shaking 18\" subwoofer\u003c\/strong\u003e\u003c\/p\u003e\n\u003cdiv id=\"detailsContainer\"\u003e\n\u003c!-- Function-YouTubeVideo --\u003e \u003c!-- NO Video URL assigned --\u003e \u003ca name=\"youTubeVideo\"\u003e\u003c\/a\u003e\n\u003cdiv class=\"details\"\u003e\n\u003cp class=\"description\" itemprop=\"description\"\u003ePRX418S is an eighteen inch subwoofer which, when combined with the two-way models, provides a sub\/sat system capable of generating 135 dB of full-range, high quality audio. They feature a pole mount flange for a full range speaker, recessed handles for easy transport, and most importantly, a rich, thundering sound.\u003cbr\u003e\u003cbr\u003ePRX400 passive speakers were designed to provide the sensitivity, frequency response and power handling needed for almost any professional audio environment while still being reasonably priced. Whether you use a powered mixer or an equipment rack full of amps and signal processing, PRX400 passive speakers deliver the sound power and bandwidth necessary to make loud music sound natural and even quiet speech intelligible.\u003cbr\u003e\u003cbr\u003ePRX400 passive speakers are made of tour-tested JBL components and feature professional connectivity via Neutrik Speakon combination connectors. PRX400 cabinets are artfully constructed from an 18mm Birch\/Poplar multi-laminate hardwood covered in highly resilient DuraFlexTM and feature rugged 16 gauge steel grilles.\u003c\/p\u003e\n\u003ch5 class=\"description\" itemprop=\"description\"\u003eFEATURES\u003c\/h5\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cdiv id=\"featuresContainer\"\u003e\n\u003cdiv class=\"specs\"\u003e\n\u003cul\u003e\n\u003cli\u003e\u003cspan style=\"line-height: 1.5;\"\u003eHigh handling capacity\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan style=\"line-height: 1.5;\"\u003eDeep frequency response\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan style=\"line-height: 1.5;\"\u003eRugged construction\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan style=\"line-height: 1.5;\"\u003eResistant to scuffs and scratches\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan style=\"line-height: 1.5;\"\u003eFrequency Range : 35 Hz - 250 Hz\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan style=\"line-height: 1.5;\"\u003eFrequency Response : 52 Hz - 120 Hz\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan style=\"line-height: 1.5;\"\u003eSystem Sensitivity : 95 dB SPL (1w@1m)\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan style=\"line-height: 1.5;\"\u003ePower Rating, Pink Noise : 800 W \/ 1600 W \/ 3200 W\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan style=\"line-height: 1.5;\"\u003e(Continuous\/Program\/Peak)\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan style=\"line-height: 1.5;\"\u003eRated Maximum SPL : 130 dB SPL peak\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan style=\"line-height: 1.5;\"\u003eNominal Impedance : 8 ohms\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan style=\"line-height: 1.5;\"\u003eDimensions (W x H x D): 21.1\" x 26.7\" x 24.2\"\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan style=\"line-height: 1.5;\"\u003eNet Weight : 79lb\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan style=\"line-height: 1.5;\"\u003eMPN : PRX418S\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan style=\"line-height: 1.5;\"\u003eUPC : 50036904056\u003c\/span\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cdiv id=\"specsContainer\"\u003e\n\u003cdiv class=\"specs\"\u003e\n\u003cul\u003e\u003c\/ul\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e","published_at":"2015-07-09T06:00:00-07:00","created_at":"2015-07-09T06:00:27-07:00","vendor":"JBL","type":"Sub Woofer","tags":["50036904056","cf-type-sub-woofer","cf-vendor-jbl","jbl prx418s 18-inch","QSC","speakers\/monitors","stage","subwoofer","yamaha"],"price":74900,"price_min":74900,"price_max":74900,"available":true,"price_varies":false,"compare_at_price":99999,"compare_at_price_min":99999,"compare_at_price_max":99999,"compare_at_price_varies":false,"variants":[{"id":4571615939,"title":"Default Title","option1":"Default Title","option2":null,"option3":null,"sku":"JPRX418S","requires_shipping":true,"taxable":true,"featured_image":null,"available":true,"name":"JBL PRX418S Compact 18\" Subwoofer - PRX418S","public_title":null,"options":["Default Title"],"price":74900,"weight":36287,"compare_at_price":99999,"inventory_quantity":11,"inventory_management":null,"inventory_policy":"deny","barcode":"50036904056","requires_selling_plan":false,"selling_plan_allocations":[]}],"images":["\/\/cdn.shopify.com\/s\/files\/1\/0879\/4068\/products\/main-750x750_7a958608-5bd5-4f3f-8f75-143ab6f2fcd3.jpeg?v=1436446827"],"featured_image":"\/\/cdn.shopify.com\/s\/files\/1\/0879\/4068\/products\/main-750x750_7a958608-5bd5-4f3f-8f75-143ab6f2fcd3.jpeg?v=1436446827","options":["Title"],"media":[{"alt":"JBL PRX418S 18-Inch Stage Subwoofer","id":20886257763,"position":1,"preview_image":{"aspect_ratio":1.0,"height":750,"width":750,"src":"https:\/\/cdn.shopify.com\/s\/files\/1\/0879\/4068\/products\/main-750x750_7a958608-5bd5-4f3f-8f75-143ab6f2fcd3.jpeg?v=1568697147"},"aspect_ratio":1.0,"height":750,"media_type":"image","src":"https:\/\/cdn.shopify.com\/s\/files\/1\/0879\/4068\/products\/main-750x750_7a958608-5bd5-4f3f-8f75-143ab6f2fcd3.jpeg?v=1568697147","width":750}],"requires_selling_plan":false,"selling_plan_groups":[],"content":"\u003cdiv class='\"content\"'\u003e\n\u003cdiv class='\"productDescriptionWrapper\"'\u003e\n\u003cdiv class='\"emptyClear\"'\u003e\n\u003cp class=\"overviewSubHeading\"\u003e\u003cstrong\u003eEarth-shaking 18\" subwoofer\u003c\/strong\u003e\u003c\/p\u003e\n\u003cdiv id=\"detailsContainer\"\u003e\n\u003c!-- Function-YouTubeVideo --\u003e \u003c!-- NO Video URL assigned --\u003e \u003ca name=\"youTubeVideo\"\u003e\u003c\/a\u003e\n\u003cdiv class=\"details\"\u003e\n\u003cp class=\"description\" itemprop=\"description\"\u003ePRX418S is an eighteen inch subwoofer which, when combined with the two-way models, provides a sub\/sat system capable of generating 135 dB of full-range, high quality audio. They feature a pole mount flange for a full range speaker, recessed handles for easy transport, and most importantly, a rich, thundering sound.\u003cbr\u003e\u003cbr\u003ePRX400 passive speakers were designed to provide the sensitivity, frequency response and power handling needed for almost any professional audio environment while still being reasonably priced. Whether you use a powered mixer or an equipment rack full of amps and signal processing, PRX400 passive speakers deliver the sound power and bandwidth necessary to make loud music sound natural and even quiet speech intelligible.\u003cbr\u003e\u003cbr\u003ePRX400 passive speakers are made of tour-tested JBL components and feature professional connectivity via Neutrik Speakon combination connectors. PRX400 cabinets are artfully constructed from an 18mm Birch\/Poplar multi-laminate hardwood covered in highly resilient DuraFlexTM and feature rugged 16 gauge steel grilles.\u003c\/p\u003e\n\u003ch5 class=\"description\" itemprop=\"description\"\u003eFEATURES\u003c\/h5\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cdiv id=\"featuresContainer\"\u003e\n\u003cdiv class=\"specs\"\u003e\n\u003cul\u003e\n\u003cli\u003e\u003cspan style=\"line-height: 1.5;\"\u003eHigh handling capacity\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan style=\"line-height: 1.5;\"\u003eDeep frequency response\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan style=\"line-height: 1.5;\"\u003eRugged construction\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan style=\"line-height: 1.5;\"\u003eResistant to scuffs and scratches\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan style=\"line-height: 1.5;\"\u003eFrequency Range : 35 Hz - 250 Hz\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan style=\"line-height: 1.5;\"\u003eFrequency Response : 52 Hz - 120 Hz\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan style=\"line-height: 1.5;\"\u003eSystem Sensitivity : 95 dB SPL (1w@1m)\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan style=\"line-height: 1.5;\"\u003ePower Rating, Pink Noise : 800 W \/ 1600 W \/ 3200 W\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan style=\"line-height: 1.5;\"\u003e(Continuous\/Program\/Peak)\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan style=\"line-height: 1.5;\"\u003eRated Maximum SPL : 130 dB SPL peak\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan style=\"line-height: 1.5;\"\u003eNominal Impedance : 8 ohms\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan style=\"line-height: 1.5;\"\u003eDimensions (W x H x D): 21.1\" x 26.7\" x 24.2\"\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan style=\"line-height: 1.5;\"\u003eNet Weight : 79lb\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan style=\"line-height: 1.5;\"\u003eMPN : PRX418S\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan style=\"line-height: 1.5;\"\u003eUPC : 50036904056\u003c\/span\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cdiv id=\"specsContainer\"\u003e\n\u003cdiv class=\"specs\"\u003e\n\u003cul\u003e\u003c\/ul\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e"}

{"id":1528189571,"title":"JBL PRX425 15\" 2-Way Loudspeaker System - PRX425","handle":"jbl-prx425-channel-unpowered-speaker-cabinet-jprx425","description":"\u003cdiv class='\"content\"'\u003e\n\u003cdiv class='\"productDescriptionWrapper\"'\u003e\n\u003cdiv class='\"emptyClear\"'\u003e\n\u003cp class=\"overviewSubHeading\"\u003e\u003cstrong\u003ePowerful dual 15\" full-range cabinet for live or recorded music\u003c\/strong\u003e\u003c\/p\u003e\n\u003cdiv id=\"detailsContainer\"\u003e\n\u003c!-- Function-YouTubeVideo --\u003e \u003c!-- NO Video URL assigned --\u003e \u003ca name=\"youTubeVideo\"\u003e\u003c\/a\u003e\n\u003cdiv class=\"details\"\u003e\n\u003cp class=\"description\" itemprop=\"description\"\u003eThe JBL PRX425 is a passive speaker equipped with dual 15\" speakers and a high-frequency horn driver, designed to provide the sensitivity, frequency response and power handling needed for almost any professional audio environment, while still being reasonably priced. Whether you use a powered mixer or an equipment rack full of amps and signal processing, PRX400 passive speakers deliver the sound power and bandwidth necessary to make loud music sound natural and even quiet speech intelligible.\u003cbr\u003e\u003cbr\u003eThe PRX425 is made from tour-tested JBL components and feature professional connectivity via Neutrik Speakon combination connectors. It is artfully constructed from an 18mm Birch\/Poplar multi-laminate hardwood covered in highly resilient DuraFlexTM and feature rugged 16-gauge steel grilles. It features twelve M10 suspension points for safe deployment in light duty installations.\u003c\/p\u003e\n\u003ch5 class=\"description\" itemprop=\"description\"\u003eFEATURES\u003c\/h5\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cdiv id=\"featuresContainer\"\u003e\n\u003cdiv class=\"specs\"\u003e\n\u003cul\u003e\n\u003cli\u003e\u003cspan style=\"line-height: 1.5;\"\u003eRugged cabinet\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan style=\"line-height: 1.5;\"\u003eTwo 15\" speakers with high frequency driver\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan style=\"line-height: 1.5;\"\u003eRecessed handles for convenient transport\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan style=\"line-height: 1.5;\"\u003eHigh wattage handling capacity\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan style=\"line-height: 1.5;\"\u003eFrequency Range (-10 dB): 48Hz - 19 kHz\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan style=\"line-height: 1.5;\"\u003eFrequency Response (+-3 dB): 61 Hz - 16 kHz\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan style=\"line-height: 1.5;\"\u003eCoverage Pattern: 90° x 50°\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan style=\"line-height: 1.5;\"\u003eSystem Sensitivity: nominal 100 dB SPL (1w@1m)\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan style=\"line-height: 1.5;\"\u003ePower Rating: 600 W \/ 1200 W \/ 2400 W (Continuous\/Program\/Peak)\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan style=\"line-height: 1.5;\"\u003eRated Maximum SPL: 134 dB SPL peak\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan style=\"line-height: 1.5;\"\u003eNominal Impedance: 4 ohms\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan style=\"line-height: 1.5;\"\u003eDimensions (W x H x D): 16.9\" x 41.1\" x 20.5\"\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan style=\"line-height: 1.5;\"\u003eNet Weight : 74lb.\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan style=\"line-height: 1.5;\"\u003eMPN : PRX425\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan style=\"line-height: 1.5;\"\u003eUPC : 50036905695\u003c\/span\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cdiv id=\"specsContainer\"\u003e\n\u003cdiv class=\"specs\"\u003e\n\u003cul\u003e\u003c\/ul\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e","published_at":"2015-07-09T06:00:00-07:00","created_at":"2015-07-09T06:00:26-07:00","vendor":"JBL","type":"Loudspeaker","tags":["50036905695","cabinet","cf-type-loudspeaker","cf-vendor-jbl","jbl prx425 channel","speaker","speakers\/monitors","unpowered"],"price":74900,"price_min":74900,"price_max":74900,"available":true,"price_varies":false,"compare_at_price":89900,"compare_at_price_min":89900,"compare_at_price_max":89900,"compare_at_price_varies":false,"variants":[{"id":4571607619,"title":"Default Title","option1":"Default Title","option2":null,"option3":null,"sku":"JPRX425","requires_shipping":true,"taxable":true,"featured_image":null,"available":true,"name":"JBL PRX425 15\" 2-Way Loudspeaker System - PRX425","public_title":null,"options":["Default Title"],"price":74900,"weight":34019,"compare_at_price":89900,"inventory_quantity":11,"inventory_management":null,"inventory_policy":"deny","barcode":"50036905695","requires_selling_plan":false,"selling_plan_allocations":[]}],"images":["\/\/cdn.shopify.com\/s\/files\/1\/0879\/4068\/products\/main-750x750_d774cf2a-bab0-447a-ae35-1e03457bca93.jpeg?v=1436446826"],"featured_image":"\/\/cdn.shopify.com\/s\/files\/1\/0879\/4068\/products\/main-750x750_d774cf2a-bab0-447a-ae35-1e03457bca93.jpeg?v=1436446826","options":["Title"],"media":[{"alt":"JBL PRX425 Channel Unpowered Speaker Cabinet","id":20886224995,"position":1,"preview_image":{"aspect_ratio":1.0,"height":750,"width":750,"src":"https:\/\/cdn.shopify.com\/s\/files\/1\/0879\/4068\/products\/main-750x750_d774cf2a-bab0-447a-ae35-1e03457bca93.jpeg?v=1568697147"},"aspect_ratio":1.0,"height":750,"media_type":"image","src":"https:\/\/cdn.shopify.com\/s\/files\/1\/0879\/4068\/products\/main-750x750_d774cf2a-bab0-447a-ae35-1e03457bca93.jpeg?v=1568697147","width":750}],"requires_selling_plan":false,"selling_plan_groups":[],"content":"\u003cdiv class='\"content\"'\u003e\n\u003cdiv class='\"productDescriptionWrapper\"'\u003e\n\u003cdiv class='\"emptyClear\"'\u003e\n\u003cp class=\"overviewSubHeading\"\u003e\u003cstrong\u003ePowerful dual 15\" full-range cabinet for live or recorded music\u003c\/strong\u003e\u003c\/p\u003e\n\u003cdiv id=\"detailsContainer\"\u003e\n\u003c!-- Function-YouTubeVideo --\u003e \u003c!-- NO Video URL assigned --\u003e \u003ca name=\"youTubeVideo\"\u003e\u003c\/a\u003e\n\u003cdiv class=\"details\"\u003e\n\u003cp class=\"description\" itemprop=\"description\"\u003eThe JBL PRX425 is a passive speaker equipped with dual 15\" speakers and a high-frequency horn driver, designed to provide the sensitivity, frequency response and power handling needed for almost any professional audio environment, while still being reasonably priced. Whether you use a powered mixer or an equipment rack full of amps and signal processing, PRX400 passive speakers deliver the sound power and bandwidth necessary to make loud music sound natural and even quiet speech intelligible.\u003cbr\u003e\u003cbr\u003eThe PRX425 is made from tour-tested JBL components and feature professional connectivity via Neutrik Speakon combination connectors. It is artfully constructed from an 18mm Birch\/Poplar multi-laminate hardwood covered in highly resilient DuraFlexTM and feature rugged 16-gauge steel grilles. It features twelve M10 suspension points for safe deployment in light duty installations.\u003c\/p\u003e\n\u003ch5 class=\"description\" itemprop=\"description\"\u003eFEATURES\u003c\/h5\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cdiv id=\"featuresContainer\"\u003e\n\u003cdiv class=\"specs\"\u003e\n\u003cul\u003e\n\u003cli\u003e\u003cspan style=\"line-height: 1.5;\"\u003eRugged cabinet\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan style=\"line-height: 1.5;\"\u003eTwo 15\" speakers with high frequency driver\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan style=\"line-height: 1.5;\"\u003eRecessed handles for convenient transport\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan style=\"line-height: 1.5;\"\u003eHigh wattage handling capacity\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan style=\"line-height: 1.5;\"\u003eFrequency Range (-10 dB): 48Hz - 19 kHz\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan style=\"line-height: 1.5;\"\u003eFrequency Response (+-3 dB): 61 Hz - 16 kHz\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan style=\"line-height: 1.5;\"\u003eCoverage Pattern: 90° x 50°\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan style=\"line-height: 1.5;\"\u003eSystem Sensitivity: nominal 100 dB SPL (1w@1m)\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan style=\"line-height: 1.5;\"\u003ePower Rating: 600 W \/ 1200 W \/ 2400 W (Continuous\/Program\/Peak)\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan style=\"line-height: 1.5;\"\u003eRated Maximum SPL: 134 dB SPL peak\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan style=\"line-height: 1.5;\"\u003eNominal Impedance: 4 ohms\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan style=\"line-height: 1.5;\"\u003eDimensions (W x H x D): 16.9\" x 41.1\" x 20.5\"\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan style=\"line-height: 1.5;\"\u003eNet Weight : 74lb.\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan style=\"line-height: 1.5;\"\u003eMPN : PRX425\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan style=\"line-height: 1.5;\"\u003eUPC : 50036905695\u003c\/span\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cdiv id=\"specsContainer\"\u003e\n\u003cdiv class=\"specs\"\u003e\n\u003cul\u003e\u003c\/ul\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e"}

{"id":1528189251,"title":"JBL PRX710 10-Inch Two-Way Multi Purpose Self-Powered Speaker","handle":"jbl-prx710-10-inch-two-way-multi-purpose-self-powered-sound-reinforcement-jprx710","description":"\u003cp\u003e\u003cstrong\u003eThis PA Speaker Packs a Punch\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThe JBL PRX710 powered PA speaker rocks 1500 watts of onboard Class D amplification through a 10\" Differential Drive woofer and a 1.5\" neodymium compression driver, delivering stellar performance even in challenging audio environments. The PRX710 gives you the flexibility of fly, floor, or pole mounting. Sophisticated DSP provides selectable EQ, protection, input-sensitivity adjustment, crossover functionality, dynamic limiting, and component optimization. The compact PRX710 packs a punch, yet weighs in at 36 pounds, making your load-ins and outs a piece of cake. Need PA speakers? Check out the JBL PRX710.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eThe ideal balance between size and performance\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThe 2-way 10\" PA speaker gives you an ideal balance between size and performance. The JBL PRX710 takes this equation to the max - it's small, lightweight, and powerful. And it's incredibly versatile, a perfect choice for musicians, entertainers and DJ's when portability is a major consideration. It also makes a great light-duty installation speaker when hung by its super-strong 14-gauge-steel suspension points.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eAPPLICATIONS\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThe PRX710 is the most compact and versatile speaker in the PRX700 Series. Designed to deliver maximum performance for its weight and size as a front of house main PA. Two user selectable EQ settings are provided to optimize the system for either application. With a dual socket pole mount the PRX712 is a perfect match with a PRX700 Series subwoofer, offering a high performance self-powered sub\/sat system.\u003c\/p\u003e\n\u003cp\u003eThe PRX710 is comprised of a 10\" woofer, a 2408H-2, 37.5 mm (1.5 in) annular polymer diaphragm, neodymium compression driver mounted to a 100° by 60° horn, all driven by 1500 watt Class-D digital power amplifier. Sophisticated DSP is at the core of a fully featured input section, providing user selectable system EQ, protection, input sensitivity selection, cross-over functionality, dynamic limiting and discrete component optimization.\u003c\/p\u003e\n\u003cp\u003eAll PRX700 cabinets are built from a combination of 25mm (on the top and bottom for added rigidity) and 18mm, strong, light-weight poplar plywood made structurally sound with tongue and groove joints. All PRX700 Series cabinets are protected by JBL’s tour proven DuraFlex™ finish. Grilles are made from dent-resistant 16 gauge steel and handles are made from light-weight glass-filled nylon for added strength and durability. All M10 suspension points are constructed from 14 gauge steel and have been tested with a yield-strength of1000 lbs. each.\u003c\/p\u003e\n\u003cp\u003eThe amplifier input panel offers XLR or ¼ inch jack compatibility and a sensitivity switch provides extra flexibility, making it possible to connect literally any sound source without using a mixer. Signal present and limiter lights indicate the system status and assist in setting the optimum level via the level control knob.\u003c\/p\u003e\n\u003ch5\u003e FEATURES\u003c\/h5\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cspan style=\"line-height: 1.4;\"\u003e \u003c\/span\u003e\u003cspan style=\"line-height: 1.4;\"\u003e1500 watts of onboard Class D amplification\u003c\/span\u003e\n\u003c\/li\u003e\n\u003cli\u003e10\" 275F Differential Drive woofer\u003c\/li\u003e\n\u003cli\u003e5\" annular-polymer-diaphragm neodymium compression driver\u003c\/li\u003e\n\u003cli\u003e90 x 50 degree HF horn\u003c\/li\u003e\n\u003cli\u003eSophisticated onboard DSP\u003c\/li\u003e\n\u003cli\u003eXLR, TRS, and RCA jacks give you I\/O flexibility\u003c\/li\u003e\n\u003cli\u003ePoplar plywood construction for light weight and roadworthiness\u003c\/li\u003e\n\u003cli\u003eGrille is made from dent-resistant 16 gauge steel\u003c\/li\u003e\n\u003cli\u003eHandles are made from lightweight glass-filled nylon for strength and durability\u003c\/li\u003e\n\u003cli\u003eWeighs 36 pounds\u003c\/li\u003e\n\u003cli\u003eFloor, pole, or fly mounting\u003c\/li\u003e\n\u003cli\u003eSuspension points are constructed from 14 gauge steel\u003c\/li\u003e\n\u003cli\u003ePower Rating : 1500 W\u003c\/li\u003e\n\u003cli\u003eAC Power Input : 100V - 240V~ 50\/60 Hz\u003c\/li\u003e\n\u003cli\u003eFrequency Range (-10 dB) Normal: 50 Hz – 19.6kHz\u003c\/li\u003e\n\u003cli\u003eBoost: 42.9 Hz – 20kHz\u003c\/li\u003e\n\u003cli\u003eFrequency Response (±3 dB) Normal: 63.5 Hz – 18.5kHz\u003c\/li\u003e\n\u003cli\u003eBoost: 53 Hz – 18.6kHz\u003c\/li\u003e\n\u003cli\u003eCoverage Pattern : 100° x 60° nominal\u003c\/li\u003e\n\u003cli\u003eDirectivity Index (DI) : 9 dB\u003c\/li\u003e\n\u003cli\u003eDirectivity Factor (Q) : 8\u003c\/li\u003e\n\u003cli\u003eCrossover Frequency : 1.9 kHz\u003c\/li\u003e\n\u003cli\u003eMaximum SPL : 133 dB\u003c\/li\u003e\n\u003cli\u003eSignal Indicators Limit: Yellow LED indicates peak output has been reached and dsp\u003c\/li\u003e\n\u003cli\u003elimiter is acting\u003c\/li\u003e\n\u003cli\u003eSignal: Green LED indicates signal present\u003c\/li\u003e\n\u003cli\u003ePower\/Standby: Blue indicates system has power and ready to pass audio,\u003c\/li\u003e\n\u003cli\u003eRed indicates system has power but is in a power saving mode and will not\u003c\/li\u003e\n\u003cli\u003epass audio.\u003c\/li\u003e\n\u003cli\u003eDynamic Control (Input) : dbx Type IV™ limiter circuit\u003c\/li\u003e\n\u003cli\u003eInput Impedance : 20K Ohms (balanced), 10K Ohms (unbalanced)\u003c\/li\u003e\n\u003cli\u003eLF Driver : 1 x JBL M110-4 250mm (10 in) woofer\u003c\/li\u003e\n\u003cli\u003eHF Driver : 1 x JBL 2408H-2 37.5 mm (1.5\") annular polymer diaphragm, neodymium compression driver\u003c\/li\u003e\n\u003cli\u003eEnclosure : Trapezoidal, 18 mm, plywood\u003c\/li\u003e\n\u003cli\u003eSuspension \/ Mounting : single 36 mm pole socket, 8 x M10 Suspension Points, 1 x M10 pull back point\u003c\/li\u003e\n\u003cli\u003eTransport : 1 x integrated handle with injection molded backing cup\u003c\/li\u003e\n\u003cli\u003eFinish : Obsidian DuraFlex™ finish\u003c\/li\u003e\n\u003cli\u003eGrille : Powder coated, Obsidian, 16 gauge perforated steel with acoustical transparent black cloth backing.\u003c\/li\u003e\n\u003cli\u003eInput Connectors : 2 x Balanced XLR \/ 1\/4 inch input, 2 x unbalanced RCA input\u003c\/li\u003e\n\u003cli\u003eOutput Connectors : 1 male XLR balanced output\u003c\/li\u003e\n\u003cli\u003eDimensions : (H x W x D) 7 mm x 335.6 mm x 322.3 mm\u003c\/li\u003e\n\u003cli\u003e(19.63 in x 13.21 in x 12.69 in)\u003c\/li\u003e\n\u003cli\u003eNet Weight : 16.4 kg (36 lb)\u003c\/li\u003e\n\u003cli\u003eMPN : PRX710\u003c\/li\u003e\n\u003cli\u003eUPC : 50036904421\u003c\/li\u003e\n\u003c\/ul\u003e","published_at":"2015-07-09T06:00:00-07:00","created_at":"2015-07-09T06:00:25-07:00","vendor":"JBL","type":"Loudspeaker","tags":["50036904421","cf-type-loudspeaker","cf-vendor-jbl","jbl prx710 10-inch","multi","purpose","QSC","reinforcement","reverbsync:off","self-powered","sound","speakers\/monitors","two-way"],"price":74900,"price_min":74900,"price_max":74900,"available":true,"price_varies":false,"compare_at_price":94900,"compare_at_price_min":94900,"compare_at_price_max":94900,"compare_at_price_varies":false,"variants":[{"id":4571600067,"title":"Default Title","option1":"Default Title","option2":null,"option3":null,"sku":"JPRX710","requires_shipping":true,"taxable":true,"featured_image":null,"available":true,"name":"JBL PRX710 10-Inch Two-Way Multi Purpose Self-Powered Speaker","public_title":null,"options":["Default Title"],"price":74900,"weight":9072,"compare_at_price":94900,"inventory_quantity":11,"inventory_management":null,"inventory_policy":"deny","barcode":"50036904421","requires_selling_plan":false,"selling_plan_allocations":[]}],"images":["\/\/cdn.shopify.com\/s\/files\/1\/0879\/4068\/products\/main-750x750_41858658-a9e8-4482-a3ad-1489f0283425.jpeg?v=1436446825"],"featured_image":"\/\/cdn.shopify.com\/s\/files\/1\/0879\/4068\/products\/main-750x750_41858658-a9e8-4482-a3ad-1489f0283425.jpeg?v=1436446825","options":["Title"],"media":[{"alt":"JBL PRX710 10-Inch Two-Way Multi Purpose Self-Powered Sound Reinforcement","id":20886192227,"position":1,"preview_image":{"aspect_ratio":1.0,"height":750,"width":750,"src":"https:\/\/cdn.shopify.com\/s\/files\/1\/0879\/4068\/products\/main-750x750_41858658-a9e8-4482-a3ad-1489f0283425.jpeg?v=1568697147"},"aspect_ratio":1.0,"height":750,"media_type":"image","src":"https:\/\/cdn.shopify.com\/s\/files\/1\/0879\/4068\/products\/main-750x750_41858658-a9e8-4482-a3ad-1489f0283425.jpeg?v=1568697147","width":750}],"requires_selling_plan":false,"selling_plan_groups":[],"content":"\u003cp\u003e\u003cstrong\u003eThis PA Speaker Packs a Punch\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThe JBL PRX710 powered PA speaker rocks 1500 watts of onboard Class D amplification through a 10\" Differential Drive woofer and a 1.5\" neodymium compression driver, delivering stellar performance even in challenging audio environments. The PRX710 gives you the flexibility of fly, floor, or pole mounting. Sophisticated DSP provides selectable EQ, protection, input-sensitivity adjustment, crossover functionality, dynamic limiting, and component optimization. The compact PRX710 packs a punch, yet weighs in at 36 pounds, making your load-ins and outs a piece of cake. Need PA speakers? Check out the JBL PRX710.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eThe ideal balance between size and performance\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThe 2-way 10\" PA speaker gives you an ideal balance between size and performance. The JBL PRX710 takes this equation to the max - it's small, lightweight, and powerful. And it's incredibly versatile, a perfect choice for musicians, entertainers and DJ's when portability is a major consideration. It also makes a great light-duty installation speaker when hung by its super-strong 14-gauge-steel suspension points.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eAPPLICATIONS\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThe PRX710 is the most compact and versatile speaker in the PRX700 Series. Designed to deliver maximum performance for its weight and size as a front of house main PA. Two user selectable EQ settings are provided to optimize the system for either application. With a dual socket pole mount the PRX712 is a perfect match with a PRX700 Series subwoofer, offering a high performance self-powered sub\/sat system.\u003c\/p\u003e\n\u003cp\u003eThe PRX710 is comprised of a 10\" woofer, a 2408H-2, 37.5 mm (1.5 in) annular polymer diaphragm, neodymium compression driver mounted to a 100° by 60° horn, all driven by 1500 watt Class-D digital power amplifier. Sophisticated DSP is at the core of a fully featured input section, providing user selectable system EQ, protection, input sensitivity selection, cross-over functionality, dynamic limiting and discrete component optimization.\u003c\/p\u003e\n\u003cp\u003eAll PRX700 cabinets are built from a combination of 25mm (on the top and bottom for added rigidity) and 18mm, strong, light-weight poplar plywood made structurally sound with tongue and groove joints. All PRX700 Series cabinets are protected by JBL’s tour proven DuraFlex™ finish. Grilles are made from dent-resistant 16 gauge steel and handles are made from light-weight glass-filled nylon for added strength and durability. All M10 suspension points are constructed from 14 gauge steel and have been tested with a yield-strength of1000 lbs. each.\u003c\/p\u003e\n\u003cp\u003eThe amplifier input panel offers XLR or ¼ inch jack compatibility and a sensitivity switch provides extra flexibility, making it possible to connect literally any sound source without using a mixer. Signal present and limiter lights indicate the system status and assist in setting the optimum level via the level control knob.\u003c\/p\u003e\n\u003ch5\u003e FEATURES\u003c\/h5\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cspan style=\"line-height: 1.4;\"\u003e \u003c\/span\u003e\u003cspan style=\"line-height: 1.4;\"\u003e1500 watts of onboard Class D amplification\u003c\/span\u003e\n\u003c\/li\u003e\n\u003cli\u003e10\" 275F Differential Drive woofer\u003c\/li\u003e\n\u003cli\u003e5\" annular-polymer-diaphragm neodymium compression driver\u003c\/li\u003e\n\u003cli\u003e90 x 50 degree HF horn\u003c\/li\u003e\n\u003cli\u003eSophisticated onboard DSP\u003c\/li\u003e\n\u003cli\u003eXLR, TRS, and RCA jacks give you I\/O flexibility\u003c\/li\u003e\n\u003cli\u003ePoplar plywood construction for light weight and roadworthiness\u003c\/li\u003e\n\u003cli\u003eGrille is made from dent-resistant 16 gauge steel\u003c\/li\u003e\n\u003cli\u003eHandles are made from lightweight glass-filled nylon for strength and durability\u003c\/li\u003e\n\u003cli\u003eWeighs 36 pounds\u003c\/li\u003e\n\u003cli\u003eFloor, pole, or fly mounting\u003c\/li\u003e\n\u003cli\u003eSuspension points are constructed from 14 gauge steel\u003c\/li\u003e\n\u003cli\u003ePower Rating : 1500 W\u003c\/li\u003e\n\u003cli\u003eAC Power Input : 100V - 240V~ 50\/60 Hz\u003c\/li\u003e\n\u003cli\u003eFrequency Range (-10 dB) Normal: 50 Hz – 19.6kHz\u003c\/li\u003e\n\u003cli\u003eBoost: 42.9 Hz – 20kHz\u003c\/li\u003e\n\u003cli\u003eFrequency Response (±3 dB) Normal: 63.5 Hz – 18.5kHz\u003c\/li\u003e\n\u003cli\u003eBoost: 53 Hz – 18.6kHz\u003c\/li\u003e\n\u003cli\u003eCoverage Pattern : 100° x 60° nominal\u003c\/li\u003e\n\u003cli\u003eDirectivity Index (DI) : 9 dB\u003c\/li\u003e\n\u003cli\u003eDirectivity Factor (Q) : 8\u003c\/li\u003e\n\u003cli\u003eCrossover Frequency : 1.9 kHz\u003c\/li\u003e\n\u003cli\u003eMaximum SPL : 133 dB\u003c\/li\u003e\n\u003cli\u003eSignal Indicators Limit: Yellow LED indicates peak output has been reached and dsp\u003c\/li\u003e\n\u003cli\u003elimiter is acting\u003c\/li\u003e\n\u003cli\u003eSignal: Green LED indicates signal present\u003c\/li\u003e\n\u003cli\u003ePower\/Standby: Blue indicates system has power and ready to pass audio,\u003c\/li\u003e\n\u003cli\u003eRed indicates system has power but is in a power saving mode and will not\u003c\/li\u003e\n\u003cli\u003epass audio.\u003c\/li\u003e\n\u003cli\u003eDynamic Control (Input) : dbx Type IV™ limiter circuit\u003c\/li\u003e\n\u003cli\u003eInput Impedance : 20K Ohms (balanced), 10K Ohms (unbalanced)\u003c\/li\u003e\n\u003cli\u003eLF Driver : 1 x JBL M110-4 250mm (10 in) woofer\u003c\/li\u003e\n\u003cli\u003eHF Driver : 1 x JBL 2408H-2 37.5 mm (1.5\") annular polymer diaphragm, neodymium compression driver\u003c\/li\u003e\n\u003cli\u003eEnclosure : Trapezoidal, 18 mm, plywood\u003c\/li\u003e\n\u003cli\u003eSuspension \/ Mounting : single 36 mm pole socket, 8 x M10 Suspension Points, 1 x M10 pull back point\u003c\/li\u003e\n\u003cli\u003eTransport : 1 x integrated handle with injection molded backing cup\u003c\/li\u003e\n\u003cli\u003eFinish : Obsidian DuraFlex™ finish\u003c\/li\u003e\n\u003cli\u003eGrille : Powder coated, Obsidian, 16 gauge perforated steel with acoustical transparent black cloth backing.\u003c\/li\u003e\n\u003cli\u003eInput Connectors : 2 x Balanced XLR \/ 1\/4 inch input, 2 x unbalanced RCA input\u003c\/li\u003e\n\u003cli\u003eOutput Connectors : 1 male XLR balanced output\u003c\/li\u003e\n\u003cli\u003eDimensions : (H x W x D) 7 mm x 335.6 mm x 322.3 mm\u003c\/li\u003e\n\u003cli\u003e(19.63 in x 13.21 in x 12.69 in)\u003c\/li\u003e\n\u003cli\u003eNet Weight : 16.4 kg (36 lb)\u003c\/li\u003e\n\u003cli\u003eMPN : PRX710\u003c\/li\u003e\n\u003cli\u003eUPC : 50036904421\u003c\/li\u003e\n\u003c\/ul\u003e"}

{"id":1528188995,"title":"JBL PRX712 12\" 2-Way Powered Loudspeaker System - PRX712","handle":"jbl-prx712-12-inch-two-way-full-range-main-system-floor-monitor-jprx712","description":"\u003cp\u003e\u003cstrong\u003eActive enclosure with unprecedented power and bandwidth.\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThe PRX700 Series represents an evolutionary step in powered speaker design. Efficient amplifier power, rugged durability and enhanced versatility combine together in a self-powered loudspeaker designed from the ground up to perform in the real world of sound reinforcement. Inconvenient audio environments, high ambient noise levels and loud volumes are typical features of performing, and the PRX700 Series is adept at meeting all of these challenges. They are the first systems to use JBL's patented Differential Drive technology with ferrite drivers featuring high power, wide bandwidth and low distortion. Versatile, scalable, easy-to-transport and set up, the PRX700 Series use JBL's tour tested technology throughout for a lifetime of reliable performance you can trust.\u003c\/p\u003e\n\u003cp\u003eThe JBL PRX712 is a powered two-way enclosure with a 1500-watts of Class D power. The clarity of this enclosure relative to its volume is revolutionary. JBL's Differential Drive technology incorporates lower mass in the ferrite magnet for reduced weight while maximizing power amp efficiency for greater heat dissipation and increased power handling.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eAPPLICATIONS \u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003ePRX712 is a compact and versatile speaker in the PRX700 Series. It has been designed to deliver maximum performance for its weight and size as both a stage monitor and a front of house main PA. Two user selectable EQ settings are provided to optimize the system for either application. With a dual socket pole mount the PRX712 is a perfect match with a PRX718XLF subwoofer, offering a high performance self-powered sub\/sat system.\u003c\/p\u003e\n\u003cp\u003eThe PRX712 is comprised of a 12\" Differential Drive® woofer, a 2408H-1, 37.5 mm (1.5 in) annular polymer diaphragm, neodymium compression driver mounted to a 90° by 50° horn, all driven by 1500 watt Class-D digital power amplifier. Sophisticated DSP is at the core of a fully featured input section, providing user selectable system EQ, protection, input sensitivity selection, cross-over functionality, dynamic limiting and discrete component optimization.\u003c\/p\u003e\n\u003cp\u003eAll PRX700 cabinets are built from a combination of 25mm (on the top and bottom for added rigidity) and 18mm, strong, light-weight poplar plywood made structurally sound with tongue and groove joints. All PRX700 Series cabinets are protected by JBL’s tour proven DuraFlex™ finish. Grilles are made from dent-resistant 16 gauge steel and handles are made from light-weight glass-filled nylon for added strength and durability. All M10 suspension points are constructed from 14 gauge steel and have been tested with a yield-strength of 1000 lbs. each.\u003c\/p\u003e\n\u003cp\u003eThe amplifier input panel offers XLR or ¼ inch jack compatibility and a sensitivity switch provides extra flexibility, making it possible to connect literally any sound source without using a mixer. Signal present and limiter lights indicate the system status and assist in setting the optimum level via the level control knob.\u003c\/p\u003e\n\u003ch5\u003eFEATURES\u003c\/h5\u003e\n\u003cul\u003e\n\u003cli\u003e\u003cspan style=\"line-height: 1.5;\"\u003eLight weight\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan style=\"line-height: 1.5;\"\u003eHigh power\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan style=\"line-height: 1.5;\"\u003eLow distortion\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan style=\"line-height: 1.5;\"\u003eHigh output\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan style=\"line-height: 1.5;\"\u003ePower Rating : 1500 W\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan style=\"line-height: 1.5;\"\u003eAC Power Input : 100V - 240V~ 50\/60 Hz\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan style=\"line-height: 1.5;\"\u003eFrequency Range (-10 dB) Main : 44.8 Hz – 19.6 kHz\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan style=\"line-height: 1.5;\"\u003eMonitor : 44.8 Hz – 19.5 kHz\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan style=\"line-height: 1.5;\"\u003eFrequency Response (±3 dB) Main : 55.7 Hz – 18.2 kHz\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan style=\"line-height: 1.5;\"\u003eMonitor : 56.5 Hz – 17.7 kHz\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan style=\"line-height: 1.5;\"\u003eCoverage Pattern : 90° x 50° nominal\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan style=\"line-height: 1.5;\"\u003eDirectivity Index (DI) : 10.2 dB\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan style=\"line-height: 1.5;\"\u003eDirectivity Factor (Q) : 10.4\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan style=\"line-height: 1.5;\"\u003eCrossover Frequency : 1.8 kHz\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan style=\"line-height: 1.5;\"\u003eMaximum SPL Normal : 135 dB\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan style=\"line-height: 1.5;\"\u003eBoost : 135 dB\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan style=\"line-height: 1.5;\"\u003eSignal Indicators : Limit: Yellow LED indicates peak output has been reached and dsp\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan style=\"line-height: 1.5;\"\u003elimiter is acting\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan style=\"line-height: 1.5;\"\u003eSignal : Green LED indicates signal present\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan style=\"line-height: 1.5;\"\u003ePower\/Standby : Blue indicates system has power and ready to pass audio,\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan style=\"line-height: 1.5;\"\u003eRed indicates system has power but is in a power saving mode and will not\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan style=\"line-height: 1.5;\"\u003epass audio.\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan style=\"line-height: 1.5;\"\u003eDynamic Control (Input) : dbx Type IV™ limiter circuit\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan style=\"line-height: 1.5;\"\u003eInput Impedance : 20K Ohms (balanced), 10K Ohms (unbalanced)\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan style=\"line-height: 1.5;\"\u003eLF Driver : 1 x JBL 272G 305mm (12 in) woofer\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan style=\"line-height: 1.5;\"\u003eHF Driver : 1 x JBL 2408H-2 37.5 mm (1.5 in) annular polymer diaphragm, neodymium compression driver\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan style=\"line-height: 1.5;\"\u003eEnclosure : Asymmetrical, 18 mm, plywood\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan style=\"line-height: 1.5;\"\u003eSuspension \/ Mounting : Dual 36 mm pole socket, 12 x M10 Suspension Points\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan style=\"line-height: 1.5;\"\u003eTransport : 1 x injection molded handles with backing cup\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan style=\"line-height: 1.5;\"\u003eFinish : Obsidian DuraFlex™ finish\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan style=\"line-height: 1.5;\"\u003eGrille Powder coated, Obsidian, 16 gauge perforated steel with acoustical transparent black cloth backing.\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan style=\"line-height: 1.5;\"\u003eInput Connectors : 2 x Balanced XLR \/ 1\/4 inch input, 2 x unbalanced RCA input\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan style=\"line-height: 1.5;\"\u003eOutput Connectors : 1 male XLR balanced output\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan style=\"line-height: 1.5;\"\u003eDimensions : (H x W x D)612.394 mm x 384.556 mm x 341.376 mm(24.11 in x 15.14 in x 13.44 in)\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan style=\"line-height: 1.5;\"\u003eNet Weight : 19.4 kg (42.5 lb.)\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan style=\"line-height: 1.5;\"\u003eMPN : PRX712\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan style=\"line-height: 1.5;\"\u003eUPC : 50036904438\u003c\/span\u003e\u003c\/li\u003e\n\u003c\/ul\u003e","published_at":"2015-07-09T06:00:00-07:00","created_at":"2015-07-09T06:00:24-07:00","vendor":"JBL","type":"Loudspeaker","tags":["50036904438","cf-type-loudspeaker","cf-vendor-jbl","full","jbl prx712 12-inch","main","monitor","range","speakers\/monitors","system\/floor","two-way"],"price":84900,"price_min":84900,"price_max":84900,"available":true,"price_varies":false,"compare_at_price":99999,"compare_at_price_min":99999,"compare_at_price_max":99999,"compare_at_price_varies":false,"variants":[{"id":4571593539,"title":"Default Title","option1":"Default Title","option2":null,"option3":null,"sku":"JPRX712","requires_shipping":true,"taxable":true,"featured_image":null,"available":true,"name":"JBL PRX712 12\" 2-Way Powered Loudspeaker System - PRX712","public_title":null,"options":["Default Title"],"price":84900,"weight":27216,"compare_at_price":99999,"inventory_quantity":11,"inventory_management":null,"inventory_policy":"deny","barcode":"50036904438","requires_selling_plan":false,"selling_plan_allocations":[]}],"images":["\/\/cdn.shopify.com\/s\/files\/1\/0879\/4068\/products\/main-750x750_fb66a03b-328c-4a6e-a1a5-45c4646074a9.jpeg?v=1436446824"],"featured_image":"\/\/cdn.shopify.com\/s\/files\/1\/0879\/4068\/products\/main-750x750_fb66a03b-328c-4a6e-a1a5-45c4646074a9.jpeg?v=1436446824","options":["Title"],"media":[{"alt":"JBL PRX712 12-Inch Two-Way Full Range Main System\/Floor Monitor","id":20886159459,"position":1,"preview_image":{"aspect_ratio":1.0,"height":750,"width":750,"src":"https:\/\/cdn.shopify.com\/s\/files\/1\/0879\/4068\/products\/main-750x750_fb66a03b-328c-4a6e-a1a5-45c4646074a9.jpeg?v=1568697147"},"aspect_ratio":1.0,"height":750,"media_type":"image","src":"https:\/\/cdn.shopify.com\/s\/files\/1\/0879\/4068\/products\/main-750x750_fb66a03b-328c-4a6e-a1a5-45c4646074a9.jpeg?v=1568697147","width":750}],"requires_selling_plan":false,"selling_plan_groups":[],"content":"\u003cp\u003e\u003cstrong\u003eActive enclosure with unprecedented power and bandwidth.\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThe PRX700 Series represents an evolutionary step in powered speaker design. Efficient amplifier power, rugged durability and enhanced versatility combine together in a self-powered loudspeaker designed from the ground up to perform in the real world of sound reinforcement. Inconvenient audio environments, high ambient noise levels and loud volumes are typical features of performing, and the PRX700 Series is adept at meeting all of these challenges. They are the first systems to use JBL's patented Differential Drive technology with ferrite drivers featuring high power, wide bandwidth and low distortion. Versatile, scalable, easy-to-transport and set up, the PRX700 Series use JBL's tour tested technology throughout for a lifetime of reliable performance you can trust.\u003c\/p\u003e\n\u003cp\u003eThe JBL PRX712 is a powered two-way enclosure with a 1500-watts of Class D power. The clarity of this enclosure relative to its volume is revolutionary. JBL's Differential Drive technology incorporates lower mass in the ferrite magnet for reduced weight while maximizing power amp efficiency for greater heat dissipation and increased power handling.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eAPPLICATIONS \u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003ePRX712 is a compact and versatile speaker in the PRX700 Series. It has been designed to deliver maximum performance for its weight and size as both a stage monitor and a front of house main PA. Two user selectable EQ settings are provided to optimize the system for either application. With a dual socket pole mount the PRX712 is a perfect match with a PRX718XLF subwoofer, offering a high performance self-powered sub\/sat system.\u003c\/p\u003e\n\u003cp\u003eThe PRX712 is comprised of a 12\" Differential Drive® woofer, a 2408H-1, 37.5 mm (1.5 in) annular polymer diaphragm, neodymium compression driver mounted to a 90° by 50° horn, all driven by 1500 watt Class-D digital power amplifier. Sophisticated DSP is at the core of a fully featured input section, providing user selectable system EQ, protection, input sensitivity selection, cross-over functionality, dynamic limiting and discrete component optimization.\u003c\/p\u003e\n\u003cp\u003eAll PRX700 cabinets are built from a combination of 25mm (on the top and bottom for added rigidity) and 18mm, strong, light-weight poplar plywood made structurally sound with tongue and groove joints. All PRX700 Series cabinets are protected by JBL’s tour proven DuraFlex™ finish. Grilles are made from dent-resistant 16 gauge steel and handles are made from light-weight glass-filled nylon for added strength and durability. All M10 suspension points are constructed from 14 gauge steel and have been tested with a yield-strength of 1000 lbs. each.\u003c\/p\u003e\n\u003cp\u003eThe amplifier input panel offers XLR or ¼ inch jack compatibility and a sensitivity switch provides extra flexibility, making it possible to connect literally any sound source without using a mixer. Signal present and limiter lights indicate the system status and assist in setting the optimum level via the level control knob.\u003c\/p\u003e\n\u003ch5\u003eFEATURES\u003c\/h5\u003e\n\u003cul\u003e\n\u003cli\u003e\u003cspan style=\"line-height: 1.5;\"\u003eLight weight\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan style=\"line-height: 1.5;\"\u003eHigh power\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan style=\"line-height: 1.5;\"\u003eLow distortion\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan style=\"line-height: 1.5;\"\u003eHigh output\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan style=\"line-height: 1.5;\"\u003ePower Rating : 1500 W\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan style=\"line-height: 1.5;\"\u003eAC Power Input : 100V - 240V~ 50\/60 Hz\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan style=\"line-height: 1.5;\"\u003eFrequency Range (-10 dB) Main : 44.8 Hz – 19.6 kHz\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan style=\"line-height: 1.5;\"\u003eMonitor : 44.8 Hz – 19.5 kHz\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan style=\"line-height: 1.5;\"\u003eFrequency Response (±3 dB) Main : 55.7 Hz – 18.2 kHz\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan style=\"line-height: 1.5;\"\u003eMonitor : 56.5 Hz – 17.7 kHz\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan style=\"line-height: 1.5;\"\u003eCoverage Pattern : 90° x 50° nominal\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan style=\"line-height: 1.5;\"\u003eDirectivity Index (DI) : 10.2 dB\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan style=\"line-height: 1.5;\"\u003eDirectivity Factor (Q) : 10.4\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan style=\"line-height: 1.5;\"\u003eCrossover Frequency : 1.8 kHz\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan style=\"line-height: 1.5;\"\u003eMaximum SPL Normal : 135 dB\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan style=\"line-height: 1.5;\"\u003eBoost : 135 dB\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan style=\"line-height: 1.5;\"\u003eSignal Indicators : Limit: Yellow LED indicates peak output has been reached and dsp\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan style=\"line-height: 1.5;\"\u003elimiter is acting\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan style=\"line-height: 1.5;\"\u003eSignal : Green LED indicates signal present\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan style=\"line-height: 1.5;\"\u003ePower\/Standby : Blue indicates system has power and ready to pass audio,\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan style=\"line-height: 1.5;\"\u003eRed indicates system has power but is in a power saving mode and will not\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan style=\"line-height: 1.5;\"\u003epass audio.\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan style=\"line-height: 1.5;\"\u003eDynamic Control (Input) : dbx Type IV™ limiter circuit\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan style=\"line-height: 1.5;\"\u003eInput Impedance : 20K Ohms (balanced), 10K Ohms (unbalanced)\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan style=\"line-height: 1.5;\"\u003eLF Driver : 1 x JBL 272G 305mm (12 in) woofer\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan style=\"line-height: 1.5;\"\u003eHF Driver : 1 x JBL 2408H-2 37.5 mm (1.5 in) annular polymer diaphragm, neodymium compression driver\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan style=\"line-height: 1.5;\"\u003eEnclosure : Asymmetrical, 18 mm, plywood\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan style=\"line-height: 1.5;\"\u003eSuspension \/ Mounting : Dual 36 mm pole socket, 12 x M10 Suspension Points\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan style=\"line-height: 1.5;\"\u003eTransport : 1 x injection molded handles with backing cup\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan style=\"line-height: 1.5;\"\u003eFinish : Obsidian DuraFlex™ finish\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan style=\"line-height: 1.5;\"\u003eGrille Powder coated, Obsidian, 16 gauge perforated steel with acoustical transparent black cloth backing.\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan style=\"line-height: 1.5;\"\u003eInput Connectors : 2 x Balanced XLR \/ 1\/4 inch input, 2 x unbalanced RCA input\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan style=\"line-height: 1.5;\"\u003eOutput Connectors : 1 male XLR balanced output\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan style=\"line-height: 1.5;\"\u003eDimensions : (H x W x D)612.394 mm x 384.556 mm x 341.376 mm(24.11 in x 15.14 in x 13.44 in)\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan style=\"line-height: 1.5;\"\u003eNet Weight : 19.4 kg (42.5 lb.)\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan style=\"line-height: 1.5;\"\u003eMPN : PRX712\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan style=\"line-height: 1.5;\"\u003eUPC : 50036904438\u003c\/span\u003e\u003c\/li\u003e\n\u003c\/ul\u003e"}

{"id":1528188611,"title":"JBL PRX715 15-Inch Two-Way Full Range Main System\/Floor Monitor - PRX715","handle":"jbl-prx715-15-inch-two-way-full-range-main-system-floor-monitor-jprx715","description":"\u003cp\u003e\u003cstrong\u003eThis PA Speaker Packs a Punch\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThe JBL PRX715 powered PA speaker rocks 1500 watts of onboard Class D amplification through a 15\" Differential Drive woofer and a 1.5\" neodymium compression driver, giving you stellar performance even in challenging audio environments. You can fly, floor, or pole mount the PRX715, or you can use it as a monitor wedge. Sophisticated DSP provides selectable EQ, protection, input-sensitivity adjustment, crossover functionality, dynamic limiting, and component optimization. The compact PRX715 packs a punch, yet weighs under 48 pounds, making your load-ins and outs a piece of cake. Need PA speakers? Check out the JBL PRX715.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eThe ideal balance between size and performance\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThe 2-way 15\" PA speaker gives you an ideal balance between size and performance. The JBL PRX715 takes this equation to the max - it's small, lightweight, and powerful. And it's incredibly versatile. Its asymmetrical design make it a perfect choice for musicians, entertainers and DJ's when portability is a major consideration. It also makes a great light-duty installation speaker when hung by its super-strong 14-gauge-steel suspension points.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003e\"PRX710\"\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eJBL PRX 710 10' Two-way Multi Purpose Self-Powered Sound Reinforcement\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThe PRX710 is the next step in the highly successful PRX Series and introduces the first use of JBL's patented Differential Drive® Technology with ferrite drivers. Differential Drive technology incorporates lower mass in the ferrite magnet for reduced weight while maximizing power amp efficiency for greater heat dissipation and increased power handling. Powering the PRX710 is a 1500 Watt high performance, exceptionally low distortion biamplification system engineered to deliver clean power with maximum headroom.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003e\"PRX712\"\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eJBL PRX712 12\" Two-Way Full Range Main System\/Floor Monitor\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThe PRX712 is the next step in the highly successful PRX Series and introduces the first use of JBL's patented Differential Drive® Technology with ferrite drivers. Differential Drive technology incorporates lower mass in the ferrite magnet for reduced weight while maximizing power amp efficiency for greater heat dissipation and increased power handling. Powering the PRX712 is a 1500 Watt high performance, exceptionally low distortion biamplification system engineered to deliver clean power with maximum headroom.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eApplications \u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThe 2-way 15\" offers the perfect balance between size and performance. The PRX715 truly is an exception; it's small, light weight, versatile and powerful. The performance and asymmetrical design make this a perfect choice for musicians, entertainers and DJ's when portability is key, or when hung by the suspension points, an exceptional light-duty installation speaker. All PRX700 Series speakers were designed to excel in sound reinforcement where challenging audio environments and loud volumes are the norm. For applications requiring full bandwidth sound reproduction, the PRX715 delivers the optimum balance. For live music, recorded music playback and speech the user has the option of tailoring the EQ. A microphone can be directly connected to the speaker input for quick PA applications. Coupled with a PRX700 sub-woofer the system becomes an efficient, full-range sound system.\u003c\/p\u003e\n\u003cp\u003eThe PRX715 is comprised of 15\" 275G Differential Drive® woofer, a 2408H-2 37.5 mm (1.5 in) annular polymer diaphragm, neodymium compression driver mounted to a 90° by 50° horn, all driven by 1500 watt Class-D power amplifier. Sophisticated DSP is at the core of a fully featured input section, providing user selectable system EQ, protection, input sensitivity selection, cross-over functionality, dynamic limiting and discrete component optimization.\u003c\/p\u003e\n\u003cp\u003eAll PRX700 cabinets are built from a combination of 25mm (on the top and bottom for added rigidity) and 18mm, strong, light-weight poplar plywood made structurally sound with tongue and groove joints. All PRX700 Series cabinets are protected by JBL's tour proven DuraFlex™ finish. Grilles are made from dent-resistant 16 gauge steel and handles are made from light-weight glass-filled nylon for added strength and durability. All M10 suspension points are constructed from 14 gauge steel and have been tested with a yield-strength of 1000 lbs. each.\u003c\/p\u003e\n\u003cp\u003eThe amplifier input panel offers XLR or ¼ inch jack compatibility and a sensitivity switch provides extra flexibility, making it possible to connect literally any sound source without using a mixer. Signal present and overload lights indicate the system status and assist in setting the optimum level via the level control knob.\u003c\/p\u003e\n\u003ch5\u003e Features\u003c\/h5\u003e\n\u003cul\u003e\n\u003cli\u003e\u003cspan style=\"line-height: 1.4;\"\u003e1500 watts of onboard Class D amplification\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan style=\"line-height: 1.4;\"\u003e15\" 275F Differential Drive woofer\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan style=\"line-height: 1.4;\"\u003e1.5\" annular-polymer-diaphragm neodymium compression driver\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan style=\"line-height: 1.4;\"\u003e90 x 50 degree HF horn\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan style=\"line-height: 1.4;\"\u003eSophisticated onboard DSP\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan style=\"line-height: 1.4;\"\u003eXLR, TRS, and RCA jacks give you I\/O flexibility\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan style=\"line-height: 1.4;\"\u003ePoplar plywood construction for light weight and roadworthiness\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan style=\"line-height: 1.4;\"\u003eGrilles are made from dent-resistant 16 gauge steel\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan style=\"line-height: 1.4;\"\u003eHandles are made from lightweight glass-filled nylon for strength and durability\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan style=\"line-height: 1.4;\"\u003eWeighs under 48 pounds\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan style=\"line-height: 1.4;\"\u003eFloor, wedge, pole, or fly mounting\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan style=\"line-height: 1.4;\"\u003eSuspension points are constructed from 14 gauge steel\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan style=\"line-height: 1.4;\"\u003ePower Rating : 1500 W\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan style=\"line-height: 1.4;\"\u003eAC Power Input : 100V - 240V~ 50\/60 Hz\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan style=\"line-height: 1.4;\"\u003eFrequency Range (-10 dB) Main : 42.9 Hz - 19.5 kHz\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan style=\"line-height: 1.4;\"\u003eMonitor : 43.6 Hz - 19.3 kHz\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan style=\"line-height: 1.4;\"\u003eFrequency Response (±3 dB) Main : 58.1 Hz - 17.2 kHz\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan style=\"line-height: 1.4;\"\u003eMonitor : 60.7 Hz - 16.7 kHz\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan style=\"line-height: 1.4;\"\u003eCoverage Pattern : 90° x 50° nominal\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan style=\"line-height: 1.4;\"\u003eDirectivity Index (DI) : 10.2 dB\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan style=\"line-height: 1.4;\"\u003eDirectivity Factor (Q) : 10.4\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan style=\"line-height: 1.4;\"\u003eCrossover Frequency : 1.7 kHz\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan style=\"line-height: 1.4;\"\u003eMaximum SPL Normal : 136 dB\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan style=\"line-height: 1.4;\"\u003eBoost : 136 dB\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan style=\"line-height: 1.4;\"\u003eSignal indicatorsLimit : Yellow LED indicates peak output has been reached and dsp\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan style=\"line-height: 1.4;\"\u003elimiter is acting\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan style=\"line-height: 1.4;\"\u003eSignal : Green LED indicates signal present\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan style=\"line-height: 1.4;\"\u003ePower\/Standby : Blue indicates system has power and ready to pass audio,\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\n\u003cspan style=\"line-height: 1.4;\"\u003eRed indicates system has power but is in a power saving mode and will not \u003c\/span\u003e\u003cspan style=\"line-height: 1.5;\"\u003epass audio.\u003c\/span\u003e\n\u003c\/li\u003e\n\u003cli\u003e\u003cspan style=\"line-height: 1.4;\"\u003eDynamic Control (Input) : dbx Type IV™ limiter circuit\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan style=\"line-height: 1.4;\"\u003eInput Impedance : 20K Ohms (balanced), 10K Ohms (unbalanced)\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan style=\"line-height: 1.4;\"\u003eLF Driver : 1 x JBL 275G (15 in) woofer\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan style=\"line-height: 1.4;\"\u003eHF Driver : 1 x JBL 2408H-2 37.5 mm (1.5 in) annular polymer diaphragm, neodymium compression driver\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan style=\"line-height: 1.4;\"\u003eEnclosure : Asymmetrical, 18 mm, plywood\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan style=\"line-height: 1.4;\"\u003eSuspension \/ Mounting : Dual 36 mm pole socket, 12 x M10 Suspension Points\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan style=\"line-height: 1.4;\"\u003eTransport : 1 x injection molded handles with backing cup\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan style=\"line-height: 1.4;\"\u003eFinish : Obsidian DuraFlex™ finish\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan style=\"line-height: 1.4;\"\u003eGrille : Powder coated, Obsidian, 16 gauge perforated steel with acoustical transparent black cloth backing.\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan style=\"line-height: 1.4;\"\u003eInput Connectors : 2 x Balanced XLR \/ 1\/4 inch input, 2 x unbalanced RCA input\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan style=\"line-height: 1.4;\"\u003eOutput Connectors : 1 male XLR balanced output\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\n\u003cspan style=\"line-height: 1.4;\"\u003eDimensions (H x W x D) : 714.43 mm x 445.13 mm x 358.71 mm \u003c\/span\u003e\u003cspan style=\"line-height: 1.5;\"\u003e(28.13 in x 17.52 in x 14.12 in)\u003c\/span\u003e\n\u003c\/li\u003e\n\u003cli\u003e\u003cspan style=\"line-height: 1.4;\"\u003eNet Weight : 21.6 kg (47.5 lb.)\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan style=\"line-height: 1.4;\"\u003eMPN : PRX715\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan style=\"line-height: 1.4;\"\u003eUPC : 50036904438\u003c\/span\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cul\u003e\u003c\/ul\u003e","published_at":"2015-07-09T06:00:00-07:00","created_at":"2015-07-09T06:00:22-07:00","vendor":"JBL","type":"Monitors","tags":["50036904438","cf-type-monitors","cf-vendor-jbl","full","jbl prx715 15-inch","main","monitor","range","speakers\/monitors","system\/floor","two-way","yamaha"],"price":94900,"price_min":94900,"price_max":94900,"available":true,"price_varies":false,"compare_at_price":139999,"compare_at_price_min":139999,"compare_at_price_max":139999,"compare_at_price_varies":false,"variants":[{"id":4571585475,"title":"Default Title","option1":"Default Title","option2":null,"option3":null,"sku":"JPRX715","requires_shipping":true,"taxable":true,"featured_image":null,"available":true,"name":"JBL PRX715 15-Inch Two-Way Full Range Main System\/Floor Monitor - PRX715","public_title":null,"options":["Default Title"],"price":94900,"weight":27216,"compare_at_price":139999,"inventory_quantity":11,"inventory_management":null,"inventory_policy":"deny","barcode":"50036904438","requires_selling_plan":false,"selling_plan_allocations":[]}],"images":["\/\/cdn.shopify.com\/s\/files\/1\/0879\/4068\/products\/main-750x750_13fe7a68-4f0b-4771-808e-37559567afae.jpeg?v=1436446823"],"featured_image":"\/\/cdn.shopify.com\/s\/files\/1\/0879\/4068\/products\/main-750x750_13fe7a68-4f0b-4771-808e-37559567afae.jpeg?v=1436446823","options":["Title"],"media":[{"alt":"JBL PRX715 15-Inch Two-Way Full Range Main System\/Floor Monitor","id":20886126691,"position":1,"preview_image":{"aspect_ratio":1.0,"height":750,"width":750,"src":"https:\/\/cdn.shopify.com\/s\/files\/1\/0879\/4068\/products\/main-750x750_13fe7a68-4f0b-4771-808e-37559567afae.jpeg?v=1568697147"},"aspect_ratio":1.0,"height":750,"media_type":"image","src":"https:\/\/cdn.shopify.com\/s\/files\/1\/0879\/4068\/products\/main-750x750_13fe7a68-4f0b-4771-808e-37559567afae.jpeg?v=1568697147","width":750}],"requires_selling_plan":false,"selling_plan_groups":[],"content":"\u003cp\u003e\u003cstrong\u003eThis PA Speaker Packs a Punch\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThe JBL PRX715 powered PA speaker rocks 1500 watts of onboard Class D amplification through a 15\" Differential Drive woofer and a 1.5\" neodymium compression driver, giving you stellar performance even in challenging audio environments. You can fly, floor, or pole mount the PRX715, or you can use it as a monitor wedge. Sophisticated DSP provides selectable EQ, protection, input-sensitivity adjustment, crossover functionality, dynamic limiting, and component optimization. The compact PRX715 packs a punch, yet weighs under 48 pounds, making your load-ins and outs a piece of cake. Need PA speakers? Check out the JBL PRX715.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eThe ideal balance between size and performance\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThe 2-way 15\" PA speaker gives you an ideal balance between size and performance. The JBL PRX715 takes this equation to the max - it's small, lightweight, and powerful. And it's incredibly versatile. Its asymmetrical design make it a perfect choice for musicians, entertainers and DJ's when portability is a major consideration. It also makes a great light-duty installation speaker when hung by its super-strong 14-gauge-steel suspension points.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003e\"PRX710\"\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eJBL PRX 710 10' Two-way Multi Purpose Self-Powered Sound Reinforcement\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThe PRX710 is the next step in the highly successful PRX Series and introduces the first use of JBL's patented Differential Drive® Technology with ferrite drivers. Differential Drive technology incorporates lower mass in the ferrite magnet for reduced weight while maximizing power amp efficiency for greater heat dissipation and increased power handling. Powering the PRX710 is a 1500 Watt high performance, exceptionally low distortion biamplification system engineered to deliver clean power with maximum headroom.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003e\"PRX712\"\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eJBL PRX712 12\" Two-Way Full Range Main System\/Floor Monitor\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThe PRX712 is the next step in the highly successful PRX Series and introduces the first use of JBL's patented Differential Drive® Technology with ferrite drivers. Differential Drive technology incorporates lower mass in the ferrite magnet for reduced weight while maximizing power amp efficiency for greater heat dissipation and increased power handling. Powering the PRX712 is a 1500 Watt high performance, exceptionally low distortion biamplification system engineered to deliver clean power with maximum headroom.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eApplications \u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThe 2-way 15\" offers the perfect balance between size and performance. The PRX715 truly is an exception; it's small, light weight, versatile and powerful. The performance and asymmetrical design make this a perfect choice for musicians, entertainers and DJ's when portability is key, or when hung by the suspension points, an exceptional light-duty installation speaker. All PRX700 Series speakers were designed to excel in sound reinforcement where challenging audio environments and loud volumes are the norm. For applications requiring full bandwidth sound reproduction, the PRX715 delivers the optimum balance. For live music, recorded music playback and speech the user has the option of tailoring the EQ. A microphone can be directly connected to the speaker input for quick PA applications. Coupled with a PRX700 sub-woofer the system becomes an efficient, full-range sound system.\u003c\/p\u003e\n\u003cp\u003eThe PRX715 is comprised of 15\" 275G Differential Drive® woofer, a 2408H-2 37.5 mm (1.5 in) annular polymer diaphragm, neodymium compression driver mounted to a 90° by 50° horn, all driven by 1500 watt Class-D power amplifier. Sophisticated DSP is at the core of a fully featured input section, providing user selectable system EQ, protection, input sensitivity selection, cross-over functionality, dynamic limiting and discrete component optimization.\u003c\/p\u003e\n\u003cp\u003eAll PRX700 cabinets are built from a combination of 25mm (on the top and bottom for added rigidity) and 18mm, strong, light-weight poplar plywood made structurally sound with tongue and groove joints. All PRX700 Series cabinets are protected by JBL's tour proven DuraFlex™ finish. Grilles are made from dent-resistant 16 gauge steel and handles are made from light-weight glass-filled nylon for added strength and durability. All M10 suspension points are constructed from 14 gauge steel and have been tested with a yield-strength of 1000 lbs. each.\u003c\/p\u003e\n\u003cp\u003eThe amplifier input panel offers XLR or ¼ inch jack compatibility and a sensitivity switch provides extra flexibility, making it possible to connect literally any sound source without using a mixer. Signal present and overload lights indicate the system status and assist in setting the optimum level via the level control knob.\u003c\/p\u003e\n\u003ch5\u003e Features\u003c\/h5\u003e\n\u003cul\u003e\n\u003cli\u003e\u003cspan style=\"line-height: 1.4;\"\u003e1500 watts of onboard Class D amplification\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan style=\"line-height: 1.4;\"\u003e15\" 275F Differential Drive woofer\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan style=\"line-height: 1.4;\"\u003e1.5\" annular-polymer-diaphragm neodymium compression driver\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan style=\"line-height: 1.4;\"\u003e90 x 50 degree HF horn\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan style=\"line-height: 1.4;\"\u003eSophisticated onboard DSP\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan style=\"line-height: 1.4;\"\u003eXLR, TRS, and RCA jacks give you I\/O flexibility\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan style=\"line-height: 1.4;\"\u003ePoplar plywood construction for light weight and roadworthiness\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan style=\"line-height: 1.4;\"\u003eGrilles are made from dent-resistant 16 gauge steel\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan style=\"line-height: 1.4;\"\u003eHandles are made from lightweight glass-filled nylon for strength and durability\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan style=\"line-height: 1.4;\"\u003eWeighs under 48 pounds\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan style=\"line-height: 1.4;\"\u003eFloor, wedge, pole, or fly mounting\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan style=\"line-height: 1.4;\"\u003eSuspension points are constructed from 14 gauge steel\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan style=\"line-height: 1.4;\"\u003ePower Rating : 1500 W\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan style=\"line-height: 1.4;\"\u003eAC Power Input : 100V - 240V~ 50\/60 Hz\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan style=\"line-height: 1.4;\"\u003eFrequency Range (-10 dB) Main : 42.9 Hz - 19.5 kHz\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan style=\"line-height: 1.4;\"\u003eMonitor : 43.6 Hz - 19.3 kHz\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan style=\"line-height: 1.4;\"\u003eFrequency Response (±3 dB) Main : 58.1 Hz - 17.2 kHz\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan style=\"line-height: 1.4;\"\u003eMonitor : 60.7 Hz - 16.7 kHz\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan style=\"line-height: 1.4;\"\u003eCoverage Pattern : 90° x 50° nominal\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan style=\"line-height: 1.4;\"\u003eDirectivity Index (DI) : 10.2 dB\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan style=\"line-height: 1.4;\"\u003eDirectivity Factor (Q) : 10.4\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan style=\"line-height: 1.4;\"\u003eCrossover Frequency : 1.7 kHz\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan style=\"line-height: 1.4;\"\u003eMaximum SPL Normal : 136 dB\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan style=\"line-height: 1.4;\"\u003eBoost : 136 dB\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan style=\"line-height: 1.4;\"\u003eSignal indicatorsLimit : Yellow LED indicates peak output has been reached and dsp\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan style=\"line-height: 1.4;\"\u003elimiter is acting\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan style=\"line-height: 1.4;\"\u003eSignal : Green LED indicates signal present\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan style=\"line-height: 1.4;\"\u003ePower\/Standby : Blue indicates system has power and ready to pass audio,\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\n\u003cspan style=\"line-height: 1.4;\"\u003eRed indicates system has power but is in a power saving mode and will not \u003c\/span\u003e\u003cspan style=\"line-height: 1.5;\"\u003epass audio.\u003c\/span\u003e\n\u003c\/li\u003e\n\u003cli\u003e\u003cspan style=\"line-height: 1.4;\"\u003eDynamic Control (Input) : dbx Type IV™ limiter circuit\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan style=\"line-height: 1.4;\"\u003eInput Impedance : 20K Ohms (balanced), 10K Ohms (unbalanced)\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan style=\"line-height: 1.4;\"\u003eLF Driver : 1 x JBL 275G (15 in) woofer\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan style=\"line-height: 1.4;\"\u003eHF Driver : 1 x JBL 2408H-2 37.5 mm (1.5 in) annular polymer diaphragm, neodymium compression driver\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan style=\"line-height: 1.4;\"\u003eEnclosure : Asymmetrical, 18 mm, plywood\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan style=\"line-height: 1.4;\"\u003eSuspension \/ Mounting : Dual 36 mm pole socket, 12 x M10 Suspension Points\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan style=\"line-height: 1.4;\"\u003eTransport : 1 x injection molded handles with backing cup\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan style=\"line-height: 1.4;\"\u003eFinish : Obsidian DuraFlex™ finish\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan style=\"line-height: 1.4;\"\u003eGrille : Powder coated, Obsidian, 16 gauge perforated steel with acoustical transparent black cloth backing.\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan style=\"line-height: 1.4;\"\u003eInput Connectors : 2 x Balanced XLR \/ 1\/4 inch input, 2 x unbalanced RCA input\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan style=\"line-height: 1.4;\"\u003eOutput Connectors : 1 male XLR balanced output\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\n\u003cspan style=\"line-height: 1.4;\"\u003eDimensions (H x W x D) : 714.43 mm x 445.13 mm x 358.71 mm \u003c\/span\u003e\u003cspan style=\"line-height: 1.5;\"\u003e(28.13 in x 17.52 in x 14.12 in)\u003c\/span\u003e\n\u003c\/li\u003e\n\u003cli\u003e\u003cspan style=\"line-height: 1.4;\"\u003eNet Weight : 21.6 kg (47.5 lb.)\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan style=\"line-height: 1.4;\"\u003eMPN : PRX715\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan style=\"line-height: 1.4;\"\u003eUPC : 50036904438\u003c\/span\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cul\u003e\u003c\/ul\u003e"}

{"id":1528187331,"title":"JBL PRX735 Three-Way Full Range Main System - PRX735","handle":"jbl-prx735-three-way-full-range-main-system-jprx735","description":"\u003cp\u003e \u003cstrong\u003eActive enclosure with unprecedented power and bandwidth.\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThe PRX700 Series represents an evolutionary step in powered speaker design. Efficient amplifier power, rugged durability and enhanced versatility combine together in a self-powered loudspeaker designed from the ground up to perform in the real world of sound reinforcement. Inconvenient audio environments, high ambient noise levels and loud volumes are typical features of performing, and the PRX700 Series is adept at meeting all of these challenges. They are the first systems to use JBL's patented Differential Drive technology with ferrite drivers featuring high power, wide bandwidth and low distortion. Versatile, scalable, easy-to-transport and set up, the PRX700 Series use JBL's tour tested technology throughout for a lifetime of reliable performance you can trust.\u003c\/p\u003e\n\u003cp\u003eThe JBL PRX735 is a powered three-way enclosure with a 1500-watts of Class D power. The clarity of this enclosure relative to its volume is revolutionary. JBL's Differential Drive technology incorporates lower mass in the ferrite magnet for reduced weight while maximizing power amp efficiency for greater heat dissipation and increased power handling.\u003c\/p\u003e\n\u003cp\u003eThe amplifier input panel offers XLR or 1\/4\" jack compatibility and a sensitivity switch provides extra flexibility, making it possible to connect literally any sound source without using a mixer. Signal present and overload lights indicate the system status and assist in setting the optimum level via the level control knob.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eApplications \u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThis speaker is ideally suited to applications where the program material exhibits subtlety and nuance. Perfectly capable of reproducing high fidelity full range sound without a subwoofer, when coupled with the extended low frequencies of the PRX718XLF, complete control over the entire audio spectrum is attained. As with all the full-range PRX700 Series systems, two EQ selections can be used to optimize the system for the program material and\/or environment. The input section also accommodates either Line or Mic\/Instrument level inputs.\u003c\/p\u003e\n\u003cp\u003eThe PRX735 is a self-powered, lightweight three-way loudspeaker system capable of delivering a very high level of performance over a wide bandwidth. The PRX735 is comprised of one 15 in 275G Differential Drive® woofer, a 165 mm (6.5 in) 196H horn-loaded mid-range and a 2408H-2 37.5 mm (1.5 in) annular polymer diaphragm, neodymium compression driver mounted to a 90° by 50° horn, all driven by a 1500 watt Audio Class-D power amplifier. Sophisticated DSP is at the core of a fully featured input section, providing user selectable system EQ, protection, input sensitivity selection, cross-over functionality, dynamic limiting and discrete component optimization.\u003c\/p\u003e\n\u003cp\u003eAll PRX700 cabinets are built from a combination of 25mm (on the top and bottom for added rigidity) and 18mm, strong, light-weight poplar plywood made structurally sound with tongue and groove joints. All PRX700 Series cabinets are protected by JBL's tour proven DuraFlex™ finish. Grilles are made from dent-resistant 16 gauge steel and handles are made from light-weight glass-filled nylon for added strength and durability. All M10 suspension points are constructed from 14 gauge steel and have been tested with a yield-strength of 1000 lbs. each.\u003c\/p\u003e\n\u003cp\u003eThe amplifier input panel offers XLR or ¼ inch jack compatibility and a sensitivity switch provides extra flexibility, making it possible to connect literally any sound source without using a mixer. Signal present and overload lights indicate the system status and assist in setting the optimum level via the level control knob.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eTour Tested Technology    \u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eJBL PRX 710 10' Two-way Multi Purpose Self-Powered Sound Reinforcement\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThe PRX710 is the next step in the highly successful PRX Series and introduces the first use of JBL's patented Differential Drive® Technology with ferrite drivers. Differential Drive technology incorporates lower mass in the ferrite magnet for reduced weight while maximizing power amp efficiency for greater heat dissipation and increased power handling. Powering the PRX710 is a 1500 Watt high performance, exceptionally low distortion biamplification system engineered to deliver clean power with maximum headroom. \u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eJBL PRX712 12\" Two-Way Full Range Main System\/Floor Monitor\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThe PRX712 is the next step in the highly successful PRX Series and introduces the first use of JBL's patented Differential Drive® Technology with ferrite drivers. Differential Drive technology incorporates lower mass in the ferrite magnet for reduced weight while maximizing power amp efficiency for greater heat dissipation and increased power\u003c\/p\u003e\n\u003ch5\u003eFEATURES\u003c\/h5\u003e\n\u003cul\u003e\n\u003cli\u003e\u003cspan style=\"line-height: 1.4;\"\u003e136 dB peak SPL\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan style=\"line-height: 1.4;\"\u003e15\" Differential Drive low-frequency driver for low-distortion and higher SPL\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan style=\"line-height: 1.4;\"\u003e6.5\" horn loaded midrange transducer\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan style=\"line-height: 1.4;\"\u003e1.5\" diameter next generation JBL neodymium compression driver\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan style=\"line-height: 1.4;\"\u003eJBL designed waveguide for accurate coverage\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan style=\"line-height: 1.4;\"\u003eEfficient Class-D amplifier technology\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan style=\"line-height: 1.4;\"\u003eNormal and Boost user selectable EQ presets\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan style=\"line-height: 1.4;\"\u003eDSP input section, crossover, dynamic limiting, component optimization, selectable system EQ\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan style=\"line-height: 1.4;\"\u003eLine level and direct microphone input capability\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan style=\"line-height: 1.4;\"\u003eProfessional XLR-1\/4\" combination inputs, RCA inputs, and XLR loop-through\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan style=\"line-height: 1.4;\"\u003eMultiple injection molded handles with backing cup for easy transport\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan style=\"line-height: 1.4;\"\u003eIntegrated M10 suspension points for easy setup\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan style=\"line-height: 1.4;\"\u003eLightweight poplar plywood cabinets made structurally sound with tongue and groove joints and protected by JBL's tour proven DuraFlex finish.\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan style=\"line-height: 1.4;\"\u003eCloth backed, dent-resistant 16 gauge steel grilles\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan style=\"line-height: 1.4;\"\u003eMPN : PRX735\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan style=\"line-height: 1.4;\"\u003eUPC : 50036904100\u003c\/span\u003e\u003c\/li\u003e\n\u003c\/ul\u003e","published_at":"2015-07-09T06:00:00-07:00","created_at":"2015-07-09T06:00:17-07:00","vendor":"JBL","type":"Loudspeaker","tags":["50036904100","cf-type-loudspeaker","cf-vendor-jbl","full","jbl prx735 three-way","main","range","reverbsync:off","speakers\/monitors","system","yamaha"],"price":129900,"price_min":129900,"price_max":129900,"available":true,"price_varies":false,"compare_at_price":159999,"compare_at_price_min":159999,"compare_at_price_max":159999,"compare_at_price_varies":false,"variants":[{"id":4571576067,"title":"Default Title","option1":"Default Title","option2":null,"option3":null,"sku":"JPRX735","requires_shipping":true,"taxable":true,"featured_image":null,"available":true,"name":"JBL PRX735 Three-Way Full Range Main System - PRX735","public_title":null,"options":["Default Title"],"price":129900,"weight":36287,"compare_at_price":159999,"inventory_quantity":11,"inventory_management":null,"inventory_policy":"deny","barcode":"50036904100","requires_selling_plan":false,"selling_plan_allocations":[]}],"images":["\/\/cdn.shopify.com\/s\/files\/1\/0879\/4068\/products\/main-750x750_88093fde-77c0-44e4-9bd4-040dbfa00844.jpeg?v=1436446818"],"featured_image":"\/\/cdn.shopify.com\/s\/files\/1\/0879\/4068\/products\/main-750x750_88093fde-77c0-44e4-9bd4-040dbfa00844.jpeg?v=1436446818","options":["Title"],"media":[{"alt":"JBL PRX735 Three-Way Full Range Main System","id":20885536867,"position":1,"preview_image":{"aspect_ratio":1.0,"height":750,"width":750,"src":"https:\/\/cdn.shopify.com\/s\/files\/1\/0879\/4068\/products\/main-750x750_88093fde-77c0-44e4-9bd4-040dbfa00844.jpeg?v=1568697147"},"aspect_ratio":1.0,"height":750,"media_type":"image","src":"https:\/\/cdn.shopify.com\/s\/files\/1\/0879\/4068\/products\/main-750x750_88093fde-77c0-44e4-9bd4-040dbfa00844.jpeg?v=1568697147","width":750}],"requires_selling_plan":false,"selling_plan_groups":[],"content":"\u003cp\u003e \u003cstrong\u003eActive enclosure with unprecedented power and bandwidth.\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThe PRX700 Series represents an evolutionary step in powered speaker design. Efficient amplifier power, rugged durability and enhanced versatility combine together in a self-powered loudspeaker designed from the ground up to perform in the real world of sound reinforcement. Inconvenient audio environments, high ambient noise levels and loud volumes are typical features of performing, and the PRX700 Series is adept at meeting all of these challenges. They are the first systems to use JBL's patented Differential Drive technology with ferrite drivers featuring high power, wide bandwidth and low distortion. Versatile, scalable, easy-to-transport and set up, the PRX700 Series use JBL's tour tested technology throughout for a lifetime of reliable performance you can trust.\u003c\/p\u003e\n\u003cp\u003eThe JBL PRX735 is a powered three-way enclosure with a 1500-watts of Class D power. The clarity of this enclosure relative to its volume is revolutionary. JBL's Differential Drive technology incorporates lower mass in the ferrite magnet for reduced weight while maximizing power amp efficiency for greater heat dissipation and increased power handling.\u003c\/p\u003e\n\u003cp\u003eThe amplifier input panel offers XLR or 1\/4\" jack compatibility and a sensitivity switch provides extra flexibility, making it possible to connect literally any sound source without using a mixer. Signal present and overload lights indicate the system status and assist in setting the optimum level via the level control knob.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eApplications \u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThis speaker is ideally suited to applications where the program material exhibits subtlety and nuance. Perfectly capable of reproducing high fidelity full range sound without a subwoofer, when coupled with the extended low frequencies of the PRX718XLF, complete control over the entire audio spectrum is attained. As with all the full-range PRX700 Series systems, two EQ selections can be used to optimize the system for the program material and\/or environment. The input section also accommodates either Line or Mic\/Instrument level inputs.\u003c\/p\u003e\n\u003cp\u003eThe PRX735 is a self-powered, lightweight three-way loudspeaker system capable of delivering a very high level of performance over a wide bandwidth. The PRX735 is comprised of one 15 in 275G Differential Drive® woofer, a 165 mm (6.5 in) 196H horn-loaded mid-range and a 2408H-2 37.5 mm (1.5 in) annular polymer diaphragm, neodymium compression driver mounted to a 90° by 50° horn, all driven by a 1500 watt Audio Class-D power amplifier. Sophisticated DSP is at the core of a fully featured input section, providing user selectable system EQ, protection, input sensitivity selection, cross-over functionality, dynamic limiting and discrete component optimization.\u003c\/p\u003e\n\u003cp\u003eAll PRX700 cabinets are built from a combination of 25mm (on the top and bottom for added rigidity) and 18mm, strong, light-weight poplar plywood made structurally sound with tongue and groove joints. All PRX700 Series cabinets are protected by JBL's tour proven DuraFlex™ finish. Grilles are made from dent-resistant 16 gauge steel and handles are made from light-weight glass-filled nylon for added strength and durability. All M10 suspension points are constructed from 14 gauge steel and have been tested with a yield-strength of 1000 lbs. each.\u003c\/p\u003e\n\u003cp\u003eThe amplifier input panel offers XLR or ¼ inch jack compatibility and a sensitivity switch provides extra flexibility, making it possible to connect literally any sound source without using a mixer. Signal present and overload lights indicate the system status and assist in setting the optimum level via the level control knob.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eTour Tested Technology    \u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eJBL PRX 710 10' Two-way Multi Purpose Self-Powered Sound Reinforcement\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThe PRX710 is the next step in the highly successful PRX Series and introduces the first use of JBL's patented Differential Drive® Technology with ferrite drivers. Differential Drive technology incorporates lower mass in the ferrite magnet for reduced weight while maximizing power amp efficiency for greater heat dissipation and increased power handling. Powering the PRX710 is a 1500 Watt high performance, exceptionally low distortion biamplification system engineered to deliver clean power with maximum headroom. \u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eJBL PRX712 12\" Two-Way Full Range Main System\/Floor Monitor\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThe PRX712 is the next step in the highly successful PRX Series and introduces the first use of JBL's patented Differential Drive® Technology with ferrite drivers. Differential Drive technology incorporates lower mass in the ferrite magnet for reduced weight while maximizing power amp efficiency for greater heat dissipation and increased power\u003c\/p\u003e\n\u003ch5\u003eFEATURES\u003c\/h5\u003e\n\u003cul\u003e\n\u003cli\u003e\u003cspan style=\"line-height: 1.4;\"\u003e136 dB peak SPL\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan style=\"line-height: 1.4;\"\u003e15\" Differential Drive low-frequency driver for low-distortion and higher SPL\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan style=\"line-height: 1.4;\"\u003e6.5\" horn loaded midrange transducer\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan style=\"line-height: 1.4;\"\u003e1.5\" diameter next generation JBL neodymium compression driver\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan style=\"line-height: 1.4;\"\u003eJBL designed waveguide for accurate coverage\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan style=\"line-height: 1.4;\"\u003eEfficient Class-D amplifier technology\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan style=\"line-height: 1.4;\"\u003eNormal and Boost user selectable EQ presets\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan style=\"line-height: 1.4;\"\u003eDSP input section, crossover, dynamic limiting, component optimization, selectable system EQ\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan style=\"line-height: 1.4;\"\u003eLine level and direct microphone input capability\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan style=\"line-height: 1.4;\"\u003eProfessional XLR-1\/4\" combination inputs, RCA inputs, and XLR loop-through\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan style=\"line-height: 1.4;\"\u003eMultiple injection molded handles with backing cup for easy transport\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan style=\"line-height: 1.4;\"\u003eIntegrated M10 suspension points for easy setup\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan style=\"line-height: 1.4;\"\u003eLightweight poplar plywood cabinets made structurally sound with tongue and groove joints and protected by JBL's tour proven DuraFlex finish.\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan style=\"line-height: 1.4;\"\u003eCloth backed, dent-resistant 16 gauge steel grilles\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan style=\"line-height: 1.4;\"\u003eMPN : PRX735\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan style=\"line-height: 1.4;\"\u003eUPC : 50036904100\u003c\/span\u003e\u003c\/li\u003e\n\u003c\/ul\u003e"}